Remote Maintenance by telnet

Reference

For more information about the meaning of the data returned with these com- mands, see p.110 “Configuring the Network Interface Board”.

Network Interface Board configuration settings information

Use the show command to display the Network Interface Board configuration settings.

msh> show [-p]

Note

Add “-p” to the show command to have the information displayed one screen at a time.

Reference

For more information about the meaning of the data returned with this com- mand, see p.110 “Configuring the Network Interface Board”.

System log information

Use the syslog command to display information stored in the machine's system log.

msh> syslog

Reference

7

For more information about the displayed information, see p.113 “System Log Information”.

SNMP

Use the snmp command to display and edit SNMP configuration settings such as the community name.

Note

The 1394 Interface Unit Type 4510 supports TCP/IP only.

You can configure from ten SNMP access settings numbered 1–10.

Default access settings 1 and 2 are as follows.

Number

1

2

 

 

 

Community name

public

admin

 

 

 

IP address

0.0.0.0

0.0.0.0

 

 

 

Access type

read-only

read-write

 

trap off

trap off

 

 

 

97

Page 387
Image 387
Ricoh AP2610N setup guide Network Interface Board configuration settings information, System log information