Ricoh AP2610N setup guide Paper Feed Unit Type, Attach the interface cable to the printer

Paper Feed Unit Type 2600

Paper Feed Unit Type 2600

Important

❒Do not slide more than one paper tray out at the same time. Having more than one paper tray filled with paper in a fully extended po- sition could cause the machine to fall down.

❒Do not attach more than two Paper Feed Units in your printer at the same time.

❒Check the printer nameplate to confirm the model code.

A Check the contents of the box for the following items:

•Paper Feed Unit (including a paper tray)

•Installation Guide

B Confirm that the followings are true:

•The power switch is turned off.

•The power cord is unplugged from the wall outlet.

C Remove the adhesive tape from the Paper Feed Unit.

ZCEX390J

Note

❒If you attach two Paper Feed Units at the same time, stack them up in advance.

D There are three pins on the top of the Paper Feed Unit that point straight up. On the bottom of the printer there are three holes.

Align the holes over the pins, and 2 then lower the printer gently onto

the Paper Feed Unit.

ZGDX400J

RCAUTION:

•When lifting the machine, use the inset grips on both sides. Otherwise the printer could break or cause injury if dropped.

ZGDH052N

E Attach the interface cable to the printer.

15