Manuals / Ricoh / Computer Equipment / Printer

Ricoh AP2610N setup guide Locked Print Error Files, Press T or U to display Error Files

Models: AP2610N

1 472

Download 472 pages 11.21 Kb

Page 162

Sample Print/Locked Print

C Press {Enter #}.

F Press {T} or {U} to check "Error File(s)", and then press {Escape}.

4

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

The following message appears on the panel display.

Locked Print: 08:56 ABCD1234

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

ZDDS024N

The following message appears on the panel display.

Locked Print:

Error File(s)

D Press {T} or {U} to display “Error File(s)”.

Locked Print:

Error File(s)

E Press {Enter #}.

The following message appears on the panel display.

Error File(s): 06:52 ABCD1234

Note

❒Press {Escape} to return to the previous menu.

G Press {On Line}.

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

"Ready" appears on the panel dis- play.

Ready

60

Image 162

Ricoh AP2610N setup guide Locked Print Error Files, Press T or U to display Error Files

Contents

Setup Guide Means Power ON. b means Power OFF Setup Guide Page Trademarks Safety Information Safety During OperationPositions of Labels and Hallmarks for Rwarning and Rcaution IiiPage Energy Star Program SpecificationsEnergy Saver mode Recycled PaperManuals for This Printer Manuals for This PrinterHow to Read This Manual SymbolsVii Table of Contents Installing the Printer Driver Using USB Installing the Rpcs Printer DriverInstalling the PostScript Printer Driver Installing the Printer Driver Using IeeePage Time Saving Features of This PrinterMajor Specifications Compact BodyPrinter Drivers for This Printer PCL printer driversRpcs printer driver Adobe PostScript Printer Drivers and PPD files Agfa Monotype Font Manager SmartNetMonitor for AdminSoftware and Utilities Included on the CD SmartNetMonitor for ClientViewing the Contents of the CD-ROM Guide to This Printer MainframeExterior Output Tray Standard Tray Front Cover Release Button Power CordPower Switch Upper CoverInterior Form Feed key Job Reset keyControl Panel Menu keyEscape key Enter # keyInstalling Options Option ListAvailable Options Paper Feed Unit Type 2600 Tray 2 or TrayEnvelope Feeder Type Basic model Printer Interior Network standard model Printer Interior Memory Unit TypeB 64MB Hard Disk Drive Type802.11b Interface Unit Type a Memory Unit TypeB 64MB Paper Feed Unit Type Attach the interface cable to the printerReference Envelope Feeder Type Pull out the handle of the control- ler board Memory Unit TypeB 64MBUse a coin to remove the two screws Pull the handle and slide the con- troller board outIf the Duplex Unit is not at- tached, go to step N Installing Options Installing the Network Interface Board Network Interface Board TypeFasten the Network Interface Board to the controller board If the Duplex Unit is not at- tached, go to step O Connecting the Network Interface Cable to the Network Turn off the power switch Loop the network interface cableInstalling the 1394 Interface Unit Interface Unit TypeAttach the 1394 Interface Unit to the controller board Fasten the 1394 Interface Unit to the controller board Required cable Connecting the 1394 InterfacePower supply Bus802.11b Interface Unit Type a Attach the 802.11b Interface Unit Ing the Configuration HDD Error Initialize ? Hard Disk Drive TypeFasten the Hard Disk Drive Press Enter # to format the Hard Disk Drive HDD Initialize Finish OKReady Press On LineAD410 Duplex Unit Remove the rear cover in the hor- izontal directionAfter installing the last option that Bin Shift Sort Tray Type Remove the upper cover of the printerSlide the upper tray into the 1-bin Shift Sort Tray CS380 Mailbox CS380 Mailbox Installing Options Ethernet Configuration Setting Name ValueNetwork Setup Active Protocol Host Interface Network SetupNetwork Setup IP Address Menu Host InterfacePress U or T to display Network Boot Network Setup Network BootNetwork Boot *None IP Address 192.02k.033.044Frame Type NW *Auto Network Setup Frame Type NWNetwork Setup LAN Type LAN Type *EthernetIeee 1394 Setup IP Address1394 Ieee 1394 ConfigurationHost Interface Ieee 1394 Setup Ieee 1394 Setup IP overIeee 1394 Setup Scsi print IP Address1394 192.02k.033.044Scsi print *Active Ready Host Interface Ieee 802.11b Ieee 802.11b Wireless LAN ConfigurationIeee 802.11b Comm. Mode Press U or T to display Ieee 802.11bSubnet Mask Ieee 802.11b ChannelAddress Gateway AddressConfiguring the Printer for the Network Installation Method ConnectionQuick Install Select Quick InstallClick Install Follow the instructions on the screenInstalling the PCL 6/5e Printer Driver Installing the PCL 6/5e Printer DriverSelect PCL/RPCS Printer Drivers Setting Up Options Installing the Rpcs Printer Driver Installing the Rpcs Printer DriverInstalling the Rpcs Printer Driver Installing the printer driver Installing the PostScript Printer DriverWindows 95/98/Me Installing the PostScript Printer Driver Click Next Check Local Printer and then click NextSetting up options Select PostScript 3 Printer Driver Add Printer Wizard startsClick the Device Settings tab Windows NT 4.0 Installing the PostScript Printer Driver When connecting with a parallel cable Bidirectional transmissionWhen connecting with the network When connecting with IeeeWhen connecting with USB Macintosh Installing the PostScript 3 Printer Driver Setting up the PPD fileClick Configure Close the Chooser dialog boxCheck Specify a location, and then click Browse Installing the Printer Driver Using USBWindows 98/Me Installing the Printer Driver Using USB Click FinishClick Create Macintosh-Creating a Desktop Printer iconClick Change in USB Printer Selection Enter the printer name, and then click SaveInstalling the Printer Driver Using Ieee Printing with Scsi PrintClick Browse Click Open Click OKWindows XP Printing with IP over Inactivating the DeviceFound New Hardware Wizard dialog box, and then click Next Installing the SmartNetMonitor for Client/Admin Select SmartNetMonitor for Client/AdminInstalling the Agfa Monotype Font Manager Select Agfa Monotype Font ManagerUsing Adobe PageMaker Version 6.0 or Index Rpcs UE USA G074 Means Power ON. b means Power OFF UE USA G074-8637 Printer Reference Page Trademarks Setup Guide Printer Reference this manualHow to Read This Manual Table of Contents Sample Print Error & Status Messages on the Control PanelMaintenance Menu 114 Locked PrintConsumables 164 Information about Installed Software 165 Replacing Parts 143Specifications 157 System Menu 124Changing the default printer settings PCL 6/5e Accessing the Printer PropertiesWindows 95/98/Me Accessing the Printer Properties Making printer settings from an applicationWindows 2000/Windows XP Accessing the Printer Properties Changing the default printer settings Printer PropertiesSelect the printer you want to use in the Select Printer box Click Print to start printingWindows NT 4.0 Accessing the Printer Properties On the File menu, click Document DefaultsClick OK to start printing Rpcs Accessing the Printer Properties On the File menu, click Printing Preferences Select the printer you want to use in the Select Printer box Windows NT 4.0 Accessing the Printer Properties Making printer settings from an application PostScript Setting Up for Printing Make any settings you require and click Apply Click OKPrinting Preferences Properties appears Select the printer you want to use in the Select Printer box Windows NT 4.0 Accessing the Printer Properties Making printer settings from an application Setting up for printing from an application Macintosh Setting Up for PrintingMaking paper settings from an application On the File menu, click Page SetupOn the Document menu, click Cancel Printing Canceling a Print JobSelect the name of the job you want to cancel Press Job Reset on the control panelMacintosh Canceling a Print Job Double-click the printers icon on the desktopUninstalling the PCL 6/5e Printer Driver Windows 95/98/Me Uninstalling the PCL 6/5e Printer DriverClick Yes to uninstall the printer driver Windows NT 4.0 Uninstalling the PCL 6/5e Printer Driver Uninstalling the Rpcs Printer Driver Windows 95/98/Me Uninstalling the Rpcs Printer DriverWindows NT 4.0 Uninstalling the Rpcs Printer Driver Close all applications that are currently runningUninstalling the PostScript Printer Driver Windows 95/98/Me Uninstalling the PostScript Printer DriverWindows NT 4.0 Uninstalling the PostScript Printer Driver Macintosh Uninstalling the PostScript Printer DriverPaper and Other Media Supported by This Printer Paper Types and SizesThis manual On the panel display Paper feed direction Input Paper Sizes Metric version MmSizeInput Paper Sizes Inch version 10.12 ⋅ Paper weight and number of sheets to be set Supported paper weight Maximum number Sheets plain paper *1Output Paper Sizes Metric version Output Paper Sizes Inch version 16K 68 ⋅ 101/2 101/2 ⋅ Storing Paper Paper RecommendationsLoading Paper Types of Paper and Other Media Plain paperEnvelopes OHP transparenciesAdhesive labels Metric version Inch versionPaper not supported by this printer Printable Area Loading Paper and Other Media Loading Paper in the Paper TrayLoad paper into the tray with the print side down Changing the paper size Slide the catches inwards to unlock the traySlide the tray until it stops Return the catches to their orig- inal positionsAdjust the side guides to the pa- per width Loading Paper in the Bypass TrayOpen the Bypass Tray Bypass Size *11 x Menu Paper InputPaper Input Bypass Size Bypass Size 2 xCustom Size Vert Bypass Size Custom SizeCustom Size Horiz Menu Paper Input ReadyPaper Type Bypass Tray Setting the Bypass Tray Paper TypePaper Input Paper Type Bypass Tray Thick PaperLoading Paper in the Optional Paper Tray Loading Envelopes Loading envelopes onto the Bypass TrayLoad paper into the paper tray with the print side down Slide the side guides against the edge of the envelope stack Press U or T to display Paper Input menuLoading envelopes into the Envelope Feeder Unit Press U or T to select the envelope type you want to usePush the bottom plate down until it locks into place Press U or T to display Tray Paper Size Paper Input Tray Paper SizeTray Paper Size Tray Press U or T to display TrayReady message appears on the control panel From an application, select the menu command to print Sample PrintPrinting a Sample Print File Menu Sample Print Sample Print 0856 ABCD1234Select Action Print File Qty Press # to PrintABCD1234 Press# to Delete Deleting a Sample Print FileProcessing DeletedError Files 0652 ABCD1234 Checking the Error LogSample Print Error Files Press T or U to display Error FilesReady Locked Print Password box, type a pass- word of four digitsClick OK After making all desired settings, click OK Printing a Locked Print FileInvalid Password Try Again PasswordPassword *2 Menu Locked PrintABCD1234 Press # to Print Press T or U to display the Locked Print menuSelect Action Delete File Press T or U to display De- lete FileLocked Print Error Files Error & Status Messages on the Control Panel Messages/Second messages Description SolutionTroubleshooting See 1394 Interface Unit Type NV-RAM Error & Status Messages on the Control Panel Enter # Messages/Second messages Description Solution Messages/Second messages Description Solution Telnet Getting Printer Information over the NetworkPrinter current status Messages Description CommentsMessages Description Comments Messages Description Comments Messages Description Comments Printer configuration Input Tray NameName Description Input Tray Paper Size Paper Size DescriptionOutput Tray Status Input Tray StatusOutput Tray Name Status DescriptionPossible Cause Solutions Printer Does Not PrintTerface cable Network ConnectionERS\ UTILITY\1394\ Other Printing Problems Status Possible Causes, Descriptions, and SolutionsOn from the Maintenance menu Other Printing Problems When Remove Misfeed Paper Tray Appears Removing Misfed PaperWhen Remove Misfeed Internal Path/Open Front Cover Appears When Remove Misfeed Paper Exit Cover Appears Close the front coverClose the paper exit cover until it clicks Open the paper exit coverRemove the misfed paper Remove the rear cover in a hor Izontal directionInsert the fusing unit until it stops While holding the tab, remove the misfed paperClose the rear cover When Remove Misfeed Duplex Unit Appears Close the rear cover of the Du- plex UnitPrinter until it stops, and remove Close the cover of the Duplex UnitPull the Duplex Unit out Misfed paperOpen the upper tray cover Open the cover of the MailboxClose the cover of the Mailbox Close the upper tray coverReplacing the Toner Cartridge Be sure to put the toner cartridge on a stable, flat surface ZGDH130J Cleaning and Adjusting the Printer Cleaning the Friction PadCleaning the Paper Feed Roller Move the printer to the edge of a stable table or deskZGDM120J Cleaning the Registration Roller Adjusting the Image Density Maintenance Image DensityAdjusting the Registration of the Trays Press U or T to set the image density valuePrt. Test Sheet Tray Adjustment Horiz. TrayRegistration Prt. Test Sheet Printing100 Press U or T to set the dig- it of the registration value mmMenu Chart 101Category Function menu 102 103 Accessing the Main Menu 104105 Tray Paper Input MenuPaper Input Parameters 106Tray 1, Tray 2, Tray 107Tray Priority *Tray Changing the Paper Input MenuPaper Input Tray Priority 108109 List/Test Print Parameters Printing a ConfigurationList/Test Print Menu 110111 List/Test Print Config.Menu List/Test Print Press T or U to display the List/Test Print menuInterpreting the Configuration Paper Input MaintenanceError Log SystemMaintenance Menu 114Prt. Test Sheet Maintenance Menu ParametersAdjustment 115116 Menu Protect *Off Changing the Maintenance MenuMaintenance Menu Protect Protecting the menusCanceling the protection 118HDD Format Press# to Start Menu MaintenanceMaintenance HDD Format Completed Restart PrinterPress T or U to display the Maintenance menu Maintenance WL.LAN SignalDisplaying the Signal Strength Press T or U to display WL.LAN SignalWL.LAN Signal Good 100% Fair 50% Poor 30% Unavailable 18% 121Press Escape Resetting the Ieee 802.11b Wireless LAN Settings 122Defaults reset Maintenance WL.LAN DefaultsWL.LAN Defaults Reset-Defaults? Press T or U to display WL.LAN DefaultsSystem Menu 124125 126 Tiff 127Menu System System MisfeedRecoveryChanging the System Menu System Energy SaverEnergy Saver Saver On/Off Energy Saver Saver TimerPress U or T to display E. Saver Timer Energy Saver *30 minutesHost Interface Menu Host Interface Parameters130 Menu Description Network Setup IP Address131 Active Protocol Network BootFrame Type NW EthernetIP over IP Address1394Subnet Mask1394 Scsi printChannel WEP SettingsComm.Mode Trans. SpeedChanging the Host Interface Menu Host Interface TimeoutPress U or T to display I/O Timeout 135Timeout *15 seconds 136PCL Menu PCL Parameters137 138 Orientation Portrait Changing the PCL MenuPCL Menu Orientation 139140 Menu Language Language MenuChanging the Language Menu 141Language English 142Replacing Parts 143Maintenance KIT Type Checking the contents of the boxPreparing to replace the parts Check the contents of the box for the following itemsReplacing the Friction Pad 145Replacing the Paper Feed Rollers Insert the new friction pad in the paper trayReplacing the Transfer Roller 147148 Replacing the Fusing Unit 149Remove the rear cover in a hor- izontal direction Pull the fusing unit out Replace the new fusing unit into the printer150 Shift Collate Collate and Shift CollateCollate 151Spool Printing Confirm or delete the spooled job from a Web browser152 Setting of the Frame Priority Memory Capacity and Paper Size153 Setting of the Font Priority 154Moving the printer in the short distance Moving and Transporting the PrinterMoving the Printer 155Removing the Duplex Unit 156Specifications Power Consumption Paper WeightPower Source Dimensions *1Paper Output Capacity Warm-up TimePaper Capacity MemoryAD410 Duplex Unit Dimensions W⋅D⋅H Paper Feed Unit Type Dimensions W⋅D⋅HEnvelope Feeder Type Dimensions W⋅D⋅H OptionsStack Capacity Bin Shift Sort Tray Type Dimensions W ⋅ D ⋅ HCS380 Mailbox Dimensions W ⋅ D ⋅ H Hard Disk Drive Type Storage Capacity FormattedMemory Unit TypeB 64MB Module Type Number of PinsInterface Connector Memory TypeProtocol Transmission Mode802.11b Interface Unit TypeA R-WL11 Transmission Spec Data Transfer SpeedToner Cartridge Maintenance KitConsumables 164Information about Installed Software Expat165 NetBSD 166Authors Name List 167168 169 170 Copyright UE USA G073-8617 Network Printing Guide Page Manuals for This Machine How to Read This Manual Features Interface supported protocols Setting Up the Machine on a Network Windows 95/98/Me, Windows 2000/Windows XP, Windows NTConfiguring the machine as a print server NetWareConfiguring the machine as a remote printer MacintoshPrinting using the Ieee 802.11b Interface Ad hoc modeInfrastructure mode Printing using the Ieee 1394 Interface Using SmartNetMonitor for Client Configuring Windows 95/98/MeConfiguring Protocols Setting Up a Client ComputerNetWare 4.x, 5/5.1 Advanced Settings Configuring Windows NTInstalling the NIB Setup Tool Configuring MacintoshUsing the Ieee 802.11b Wireless LAN Using SmartNetMonitor for AdminMonitoring and Configuring the Printer Remote Maintenance by telnetXiv Configuring Windows 95/98/Me Printing without a Print ServerPrinting with a Windows 2000 or Windows NT Print Server Configuring the machine Configuring ProtocolsConfiguring TCP/IP and IPP for Printing Command PromptConfiguring NetBEUI for Printing Configuring a Windows 95/98/Me computerConfiguration tab Configuring a Windows 95/98/Me computer Using SmartNetMonitor for Client SmartNetMonitor for Client featuresDeleting the port Installing SmartNetMonitor for ClientUninstalling SmartNetMonitor for Client Click OK to close the printer propertiesSetting Up the Printer Driver Select the printerClick the printer you want to use, and then click OK Click NetBEUI Click IPPChanging Port Settings Setting Up a Client Computer Install the printer driver as a local printerPrinters connected to the network are displayed Windows 95/98/Me Configuration Configuring Windows Printing with a Standard TCP/IP PortPrinting with a LPR Port Configuring the Protocols Configuring a Windows 2000 computerConfiguring NetBEUI for Printing Using SmartNetMonitor for Client When the confirmation message appears, click Yes Click Close to close the Printer PropertiesSetting Up the Printer Driver Then type the IP address or host name Lowing Ports box, and then click Close Configuring LPR Port Printing Click Start, point to Settings, and then click PrintersClick Next Click Network printer, and then click Next Click the printer you want to use, and then click Next Configuring Windows XP Configure the protocolWindows 2000, Windows XP or Windows NT print server Configuring the Protocols Configuring a Windows XP computer Internet ConnectionsWith the IP over 1394, click 1394 Connection Using SmartNetMonitor for Client Installing SmartNetMonitor for Client Setting Up the Printer Driver TCP/IP Changing Port Settings Configuring LPR Port Printing Click Next Click the printer you want to use, and then click Next Windows NT 4.0 Configuration Configuring Windows NTConfiguring a Windows NT computer Configuring NetBEUI for Printing Type 0 as the Lana Number Using SmartNetMonitor for Client From the Print to the following port box, select File Click ApplySetting Up the Printer Driver IPP Changing Port Settings Configuring LPR Port Printing Click Network printer server and click Next Click the printer you want to use and click OK Installing the NIB Setup Tool Printers listed by SmartNetMonitor for AdminInstalling SmartNetMonitor for Admin Running the NIB Setup ToolQuick Setup Using the NIB Setup Tool Wizard Click Wizard and click OKClick IPX protocol Dialog box for configuring the NetWare environment appears After checking the environment, click Next NetWare 3.x Advanced Settings Basic ProcedureSetting Up as a Print Server Click Property Sheet and click OKSelect Bindery Create a print queue as follows For type, select Remote Other/UnknownSetting Up as a Remote Printer PconsolePrint Server Operation Mode group, click As Remote Printer Select the printer which is indicated as Not InstalledRemote Printer No. box, type the printer number Type a new name, if you change the name of the printer To exitTo start Select Remote Parallel, LPT1 for typeNetWare 4.x, 5/5.1 Advanced Settings To use NetWare 5/5.1Click Property Sheet and click OK Click IPX protocol Print Queue volume box, click the Browse button Using Pure IP in the NetWare 5/5.1 environment Click TCP/IP protocolPrint Server Operation Mode group, click As Print Server NDS Context box, type the context of the print serverSetting Up as a Remote Printer Print Queue Volume box, click Browse button Remote Printer No. box, type the number of the printerTo exit Install the printer driver you want to use as Local printer Windows 95/98/MeClick Network and click Browse Windows Click the Printer Settings tabSelect to clear the Form feed and Enable banner check boxes Click the PostScript tabWindows NT Configuring Macintosh Changing to EtherTalkConfiguring the Printer Changing the Printer NameChanging the Zone Using SmartNetMonitor for Admin Protocol StackChanging the Network Interface Board Configuration Selecting WizardSelecting Property Sheet Managing the User Information Configuring the Energy Save ModeType the password, and then click OK From the Tools menu, select User Management ToolConfiguring the Network Interface Board with a Web Browser Operating system browser requirementsBrowser Going to the Top Header Buttons Menu ButtonsStatus Configuring the Network Interface Board Settings Ieee 802.11b Wireless LAN IPP AuthenticationPassword Verifying the Network Interface Board SettingsLinking the address URL to the Help button Monitoring and Configuring the Printer Changing Names and CommentsWeb Browser Click the NetBEUI tab Exit SmartNetMonitor for AdminSelect Property Sheet, and then click OK Type the computer name into the Computer Name boxType the user name and the password, and then click OK Change names and commentsDisplaying the Status of Printer Exit the Web browserMonitoring Printers Click Status and you can check the status of the printer Using the Ieee 802.11b Wireless LAN Setting Ieee 802.11b Wireless LANUsing in Ad hoc Mode LAN Type Ieee 802.11bChanging to Infrastructure Mode Enter your user name and pass- word, and then click OKUsing WEP Setting SsidSetting the WEP Key Applying the SettingsConfirming the Connection Make sure the LED of the Ieee 802.11b card is litRemote Maintenance by telnet Using telnetTCP/IP address Commands ListInterface name Interface to be configured ReferenceMsh ifconfig interface up Changing the InterfaceAccess Control Msh access range start-address end-addressCommand Information that is displayed Printer statusProtocol Network Interface Board configuration settings information System log informationProtocol configuration Community name configurationAccess type configuration Access configurationViewing setting IPP timeout configurationIPP user authorization configuration Setting timeout Configuring the IPP user authorizationView settings Bidirectional configuration for the direct printing portParameter Settings Commands Topics of settingSetting Ieee 802.11b Ieee 802.11b settings are displayedParameter Value to be configured Job Spool Key key valueJob Spool Setting Clearing Spool JobChanging the Host Name Address configuration AutoNetNTP Server Address Configuration Interval ConfigurationTime-zone Configuration Type the new password Changing the passwordType the current password Type the new password once againSnmp Supported MIBsPrint Log Information Understanding the Displayed InformationPrint Job Information Item name MeaningConfiguring the Network Interface Board 111 Ssid Message Description and Solutions Message ListSystem Log Information 114 115 IPXIP,NDSBINDERY 117 118 Configuring the router PrecautionsConnecting a Dial-Up Router to a Network Configuring the printer with NetWareForm Feed Printing after resetting the machinePostScript Printing from Windows NetWare Printing BannerUsing Dhcp Using AutoNetConfiguring a Wins Server Using a WWW browserClick Network Config Using telnet When Using the NIB Setup ToolWhen Using IPP with SmartNetMonitor for Client Log out from telnetSnmp Telnet 126 Copyright Network Printing Guide PostScript Page Using PostScript Page Setting up Options Job TypeNormal How to Use Sample Print Select Sample Print in Job Type Click DetailsAfter making all of the settings you want, click Print Select Sample Print in Print JobHow to Use Locked Print Select Locked Print in Job Type Click DetailsSelect Locked Print in Print Job DigitsWindows 95/98/Me Off CollateDuplex Printing Open to LeftPaper Selection Paper Size Media TypePaper source Resolution Destination TrayToner Saver User Code Duplex UnitHard Disk MailboxUpper Tray Using PostScript Installing Printer Utility for Mac Start the Macintosh Insert the CD-ROM into the CD-ROM driveStarting Printer Utility for Mac Double-click the icon of Printer Utility for MacPrinter Utility for Mac Functions File menuUtility menu Click Cancel Downloading PS FontsClick Download Displaying Printers Fonts Deleting FontsSetup Initializing the Printer DiskPrinting Font Catalog Select Print Fonts Sample... on the File menu Printing Font SampleRenaming the Printer Select Rename Printer... on the File menuRestarting the Printer Downloading PostScript FilesSelecting the Zone Close Chooser Displaying the Printer StatusLaunching the Dialogue Console Select Display Printer Status... on the Utility menuPrinter Utility for Mac Printer Utility for Mac Page Unix Supplement Page Manuals for This Printer How to Read This Manual Using the Installation Shell Script Printing MethodPage Using the Installation Shell Script Assigning the IP AddressAEnter the following Executing the Installation Shell ScriptConfirming the IP address ALog on to the workstation as rootType the following to get the installation shell script CRun the installation shell scriptClose the ftp session EEnter the IP address of the printer Configure the printer nameIMake a test print to confirm that the settings are correct FEnter the host name of the printerDeleting the printer BSD Unix workstation, LinuxSolaris, HP-UX Adding an entry to the /etc/printcap file Mx#0Making the spool directory Making the log file# lpadmin -p np -s nphost!option -T dump -I any Registering the printerRestart the scheduler Printing Method Printing with lpr, lpBSD Unix workstation Rcp To specify the file and print it Printing with rsh, rcp, ftpRsh To print all of the files in a directoryFtp To print one fileTo print several files Viewing the Printer Status with rsh and ftp Printer StatusViewing the Printer Status with lpq and lpstat System V UNIX, Soralis, HP-UXCopying Information to a File Parameter Information returned ReferenceUnix UE USA G056 Copyright Unix Supplement Quick Installation GUIDEG074-8627 Network connection Parallel connectionUSB connection