Ricoh AP2610N Close the cover of the Duplex Unit, Pull the Duplex Unit out, Misfed paper

Troubleshooting

F Close the cover of the Duplex

Unit.

If the error message appears again, go to step B.

ZGDY360J

	B Pull the Duplex Unit out of the
	printer until it stops, and remove
5
	the misfed paper.

A Push down the lever on the right side of the Duplex Unit (A) and pull it out until it stops

(B).

ZGDX320J

B Lift the guide board inside the

Duplex Unit, and remove the misfed paper.

ZGDY440J

Important

❒When A5L paper misfeeds, you might not be able to re- move it by pulling the Du- plex Unit out. In this case, pull the paper tray out and remove the paper.

C While aligning the power cord with the groove of the left slide of the Duplex Unit, insert the Duplex Unit into back of the printer aligning the rails inside of the printer until it is con- nected.

If the error message appears again, the misfed paper might be left in the printer. Confirm that any torn paper scraps are not in the inside of the printer. For more information, see p.83 “When "Remove Misfeed Inter- nal Path/Open Front Cover" Appears”.

ZGDX240J

88