Ricoh AP2610N setup guide Hard Disk Drive Type, HDD Error Initialize ?, Fasten the Hard Disk Drive

Installing Options

Hard Disk Drive Type 2600

Important

❒Before touching the Hard Disk Drive, touch something metal to discharge any static electricity.

2	Static electricity can damage the
	Hard Disk Drive.

A Check the contents of the box for the following items:

•Hard Disk Drive

•Installation Guide

B Confirm that the followings are true:

D Slowly insert the Hard Disk Drive while aligning it with the top and bottom rails in the printer until it stops.

ZCEX151J

•The power switch is turned off.

•The interface cable is un- plugged from the printer.

C Use a coin to remove the two screws, and then remove the cov- er.

Note

❒The screws and cover are not used when installing the Hard Disk Drive.

ZCEX350J

E Fasten the Hard Disk Drive.

ZCEX360J

F Attach the interface cable to the printer.

G Plug the printer's power cord back into the wall outlet, and then turn on the power switch.

The following message appears on the panel display.

HDD Error Initialize ?

32