Ricoh AP2610N setup guide Managing the User Information, Configuring the Energy Save Mode

Using SmartNetMonitor for Admin

Managing the User Information

A Run SmartNetMonitor for Admin.

B Click the [Group] menu, point to [Open LAN], and then select [TCP/IP] or [IPX/SPX].

A list of printer appears.

Note

❒Select the protocol of the printer you want to change its configuration.

C On the list, Select a printer whose statistics information you want to man- age.

D From the [Tools] menu, select [User Management Tool].

The screen that prompts you to type a password appears.

E Type the password, and then click [OK].

Note

❒The factory default password is "password". The User Code Maintenance Tool starts up.

For more information about using the User Management Tool, see SmartNet-	7
Monitor for Admin Help.

Configuring the Energy Save Mode

A Run SmartNetMonitor for Admin.

B Click the [Group] menu, point to [Open LAN], and then select [TCP/IP] or [IPX/SPX].

A list of printer appears.

Note

❒Select the protocol of the printer you want to change its configuration.

C Click [Group], point to [Energy Save Mode], and select any energy saver mode from the menu that appears.

For more information about settings, see SmartNetMonitor for Admin Help.

75