Ricoh AP2610N setup guide Removing Misfed Paper, When Remove Misfeed Paper Tray Appears

Troubleshooting

Removing Misfed Paper

When a paper misfeed occurs, an error message appears on the panel display. The procedure you should follow to remove misfed paper depends on the loca- tion of the misfeed, which is indicated on the panel display.

RCAUTION:

•When removing misfed paper, do not touch the fusing section because it becomes very hot.

Important

❒Check the following points if paper continues to misfeed.

•Confirm that the setting of the paper size dial matches the size and feed di- rection of the paper loaded in the paper tray.

•If the friction pad or the paper feed roller is dirty, clean it. For more infor- mation, see p.93 “Cleaning the Friction Pad”.

5 • Confirm that the toner cartridge is set correctly.

❒If a paper misfeed still occurs, contact your sales or service representative.

❒Forcefully removing misfed paper may cause paper to tear and leave scraps of paper in the printer.

❒Do not leave any scraps of paper in the printer.

When “Remove Misfeed Paper Tray” Appears

Important

❒Forcefully removing misfed paper may cause paper to tear and leave scraps of paper in the printer. This might cause a misfeed and damage the printer.

A Lift the paper tray slightly. Pull it out until it stops, and then re- move the misfed paper.

82 ZCEY280J

B Carefully slide the paper tray into the printer until it stops.

ZGDY290J

Important

❒Do not slide the paper tray in with force. If you do, the front and side guides might move.