Ricoh AP2610N setup guide 126, Reference

6

Making Printer Settings with the Control Panel

Menu	Description
Output Tray	You can select the default output tray. When you select "Auto
	Tray Sw.", the printer automatically changes to another output
	tray if an output tray becomes full. This function is available only
	when the Mailbox or the 1-bin Shift Sort Tray is installed.
	Standard Tray, Mailbox Tray 1, Mailbox Tray 2, Mailbox Tray 3,
	Mailbox Tray 4, Upper Tray, Auto Tray Sw.

		Note
	❒ Default: Standard Tray
	❒ Only the installed trays appear on the panel display.
Job Separation	You can enable Job Separation.
	•	On
	•	Off

	Note
	❒ Default: Off
	❒ This menu appears only when the optional 1-bin Shift Sort
	Tray is installed.
Energy Saver	You can set how many minutes the printer waits before switching
	to Energy Saver mode. Energy Saver mode reduces electric power
	consumption.
	On, Off
	1 minute, 5 minutes, 15 minutes, 30 minutes, 45 minutes, 60 min-
	utes

		Note
	❒ Default: On
	❒ Default: 30 minutes
	❒ If there is an error with the printer, the printer will not switch
		to Energy Saver mode.
	❒ When the printer switches to Energy Saver mode, the Power
		indicator turns off while the On Line indicator stays on.
Memory Usage	You can select memory to be used from "Font Priority" or "Frame
	Priority" according to the paper size, resolution or printer lan-
	guage.
	•	Font Priority
		This setting uses memory for registering fonts.
	•	Frame Priority
		This setting uses memory for high speed printing.

Note

❒Default: Frame Priority

Reference

For more information, see p.153 “Memory Capacity and Paper

Size”.

Unit Of Measure You can select "mm" or "inch" for the custom paper sizes.

126