Ricoh AP2610N setup guide Ieee 802.11b Channel, Subnet Mask, Gateway Address

IEEE 802.11b (Wireless LAN) Configuration

F Press {Enter #}. K Press {On Line}.

The following message appears on the panel display.

“Ready” appears on the panel dis- play.

Comm. Mode: *Ad hoc

G Press {U} or {T} to select the transmission mode.

H Press {Enter #}.

The display returns to the previous menu in a few seconds.

I Set "Trans. Speed" and "WEP Set- tings" in the same way.

For more information about WEP Settings, see "Using the IEEE 802.11b (Wireless LAN)" in the Network Printing Guide.

J If "Ad hoc" is selected for "Comm. Mode", set the channel to use for transmission.

Note

❒Confirm the network adminis- trator for the channel to use.

A Press {U} or {T} to display "Channel".

IEEE 802.11b:

Channel

BPress {Enter #}.

The channel currently used ap- pears on the panel display.

Ready

L Print a configuration page to con-
firm the settings made. See
"Printing a Configuration Page"	3
in the Printer Reference.

The settings are now complete. Go to p.51 “Installing the Printer Driv- er and Software”.

-Address

❖Subnet Mask

A number used to mathematically “mask” or hide an IP address on the network by eliminating those parts of the address that are alike for all the machines on the net- work.

❖Gateway Address

A gateway is a connection or inter- change point that connects two networks. A gateway address is for the router or host computer used as a gateway.

Note

❒To get the addresses, contact your network administrator.

Channel:

(1-11) 11

C Press {U} or {T} to enter the channel.

DPress {Enter #}.

49