Ricoh AP2610N setup guide When Remove Misfeed Paper Exit Cover Appears, Close the front cover

Troubleshooting

D Holding the grips of the toner car- tridge, insert it into the printer until it stops.

ZGDT120J

E Push down the toner cartridge to settle it in appropriate position.

5

ZGDT140J

F Close the front cover.

ZGDH130J

Important

❒If paper is fed from the Bypass Tray, be sure to remove all the paper from the Bypass Tray and close it before opening the front cover.

When "Remove Misfeed Paper Exit Cover" Appears

RCAUTION:

•When removing misfed paper, do not touch the fusing section because it becomes very hot.

•The fusing unit becomes very hot. When installing the new fus- ing unit, turn off the printer and wait about an hour. After that, in- stall the new fusing unit. Not waiting for the unit to cool down can result in a burn.

Important

❒Forcefully removing misfed paper may cause paper to tear and leave scraps of paper in the printer. This might cause a misfeed and damage the printer.

A If you installed the 1-bin Shift Sort Tray, slide the upper tray out from it. If you installed the Mail- box, slide the output tray into lower slide out from it.

The following procedures are ex- ample of Mailbox.

ZGDY370J

84