Ricoh AP2610N setup guide Using the Ieee 802.11b Wireless LAN, Setting Ieee 802.11b Wireless LAN

Using the IEEE 802.11b (Wireless LAN)

Using the IEEE 802.11b (Wireless LAN)

Preparation

Use the WiFi authorized card for an access point and the IEEE 802.11b card in the computer.

Setting IEEE 802.11b (Wireless LAN)

Connect the printer and the computer in Ad hoc Mode. Then set up IEEE 802.11b (Wireless LAN) according to your network environment using the following procedure.

Limitation

❒To connect in Infrastructure Mode, after connecting the printer and the com- puter in Ad hoc Mode, make settings using a Web browser and telnet by fol- lowing procedures C to E in "Using in Infrastructure Mode".

Using in Ad hoc Mode		See p.88 “Using in Ad hoc Mode”.
Using in Infrastructure Mode		A See p.88 “Using in Ad hoc Mode”.
		B See p.89	“Using in Infrastructure Mode”.
		C See p.90	“Setting SSID”.
		D See p.90	“Applying the Settings”.
				7
		E See p.91	“Confirming the Connection”.
	Using WEP	When using WEP, the following procedures
		are required after C, “Setting SSID”.
		C-ASee p.90 “Setting the WEP Key”.
		C-BSee p.90 “Using WEP”.

87