Ricoh AP2610N setup guide Be sure to put the toner cartridge on a stable, flat surface

Replacing the Toner Cartridge

B Be sure to put the toner cartridge on a stable, flat surface.

Note

❒Do not put the toner cartridge on an unstable or tilted surface.

ZGDT110J

C Wipe around the metallic regis- tration roller by turning with a soft damp cloth.

ZCEX461J

Important

❒Do not use chemical cleaner or organic solvent such as thinner or benzene.

D Take the new toner cartridge from the box.

E Place the toner cartridge on a flat surface. Pull out the tape inside the unit horizontally while hold- ing the cartridge with one hand as shown in the illustration.

ZCET151J

	Note	5
❒	Be sure to remove the tape com-

pletely before installing the new toner cartridge, otherwise the printer might be damaged.

❒Keep the toner cartridge hori- zontal when pulling out the ton- er seal. Pulling out the toner seal with the cartridge upright or tilted can cause printer failure.

❒Be careful not to get toner dust on your hands or clothes.

❒Do not shake or shock the toner cartridge after pulling out the toner seal to avoid dirt on paper surfaces, toner spillage, or printer failure.

F Holding the grips of the cartridge, insert it into the printer until it stops.

ZGDT120J

91