Ricoh AP2610N setup guide 115

	Message List
Message	Description and Solutions
Exit pserver	(In print server mode) Exits the print server
	because the necessary print server settings
	have not been made.
Frametype =<frame type name>	The <frame type name> is configured to be
	used on NetWare.
httpd start.	An httpd has started.
IEEE 802.11b current channel <Channel>	The current channel is displayed.
	The value chosen by the user is displayed in ad
	hoc mode.
	The channel used in the access point is dis-
	played in infrastructure mode.
	(Example: Current channel is 11.)
	IEEE 802.11b current channel 11
IEEE 802.11b MAC Address = <MAC Ad-	The IEEE 802.11b I/F MAC address is dis-
dress>	played.
	(Example: Current MAC address is
	00:00:74:XX:XX:XX.)
	IEEE 802.11b MAC Address =
	00:00:74:XX:XX:XX
IEEE 802.11b SSID <ssid> (AP MAC Address	The SSID of the access point used in infrastruc-
< MAC Address>)	ture mode and the MAC address of the access
	point are displayed.	7
	(Example: Current MAC address is
	xx:xx:xx:xx:xx:xx and SSID value is "test-ssid".)
	IEEE 802.11b SSID test-ssid (AP MAC Address
	xx:xx:xx:xx:xx:xx)
IEEE 802.11b Tx Rate <Transfer Speed>	The IEEE 802.11b transmitting speed (set
	speed) is displayed.
	(Example: Current Tx Rate is 11Mbps.)
	IEEE 802.11b Tx Rate 11Mbps
inetd start.	An inetd has started.
<interface> started with IP: <IP address>	<IP address> has been set for <Interface> and
	<Interface> started.
<Interface>: Subnet overlap.	Subnet from Netmask and the IP address you
	tried to set for <Interface> overlap the subnet
	for another interface.
	Set Subnet so that it does not overlap with an-
	other interface.
IPP cancel-job: permission denied.	The printer could not authenticate the name of
	the user attempting to cancel a job.
ipp disable.	Printing with ipp is disabled.
ipp enable.	Printing with ipp is enabled.

115