Ricoh AP2610N setup guide Replacing the Transfer Roller, 147

Replacing Parts

Note

❒If the printer is equipped with the optional Paper Feed Unit, do not move the printer and the unit together, they are not se- curely attached.

B Slide the green lock lever to the right (A), remove the paper feed roller (B).

ZGDM120J

C While sliding the green lock lever to the right (A), set the new roller (B). After that, return the green lock lever to its original position (C).

ZCEM130J

Note

❒Confirm that the green lock le- ver secures the roller correctly by checking if the new roller ro- tates smoothly.

D If the printer is equipped with the optional Paper Feed Unit(s), fol- low the same procedure when re- placing the paper feed roller.

If you installed two Paper Feed Units, also replace both paper feed rollers.

E Leave the paper tray pulled out and go to p.147 “Replacing the Transfer Roller”.

Replacing the Transfer Roller

A Open the front cover by pushing the front cover release button.

7

ZCEH120J

B Pull the toner cartridge out of the printer, while lifting the front side.

Note

❒Be sure to place the used car- tridge on the level place.

ZGDT110J

147