Ricoh AP2610N Setting Up a Client Computer, Install the printer driver as a local printer

Windows 95/98/Me Configuration

Setting Up a Client Computer

This section describes the procedures for setting up a client on a network that

1 uses Windows 2000, Windows XP, Windows NT Server or Windows NT Work- station as a print server.

When using a Windows 2000, Windows XP or Windows NT print server, select a shared printer on Windows 2000, Windows XP or Windows NT.

Windows 2000, Windows XP or

Windows NT Print Server

Windows 95/98/Me

Limitation

❒When using a print server connected to the printer with SmartNetMonitor for Client, you cannot use Recovery Printing and Parallel Printing.

Note

❒This section assumes that the client has already been configured to communi- cate with a Windows 2000, Windows XP or Windows NT print server. Do not begin the following procedure until the client has been set up and configured correctly.

A Install the printer driver as a local printer.

Reference

For more information about installing the printer driver, see the Setup Guide.

Note

❒Any port can be selected during the installation, however, LPT1 is recom- mended.

B Click [Start], point to [Settings], and then click [Printers].

C Click the icon of the printer you want to use. On the [File] menu, click [Prop- erties].

10