Ricoh AP2610N setup guide Loading Envelopes, Loading envelopes onto the Bypass Tray

Loading Paper and Other Media

D Load paper into the paper tray with the print side down.

ZCEY260J

Important

❒Confirm that the top of the stack is not higher than the limit mark inside the tray.

❒Confirm that paper fits under the rear guide.

E While lifting the front of the tray, place the tray into the printer. Then slide it inside until it stops.

ZDDP340E

Loading Envelopes

As there are many kinds of envelopes, be sure to check if those to be used are supported by this printer.

Reference

For more information about enve- lopes, see p.33 “Types of Paper and Other Media”.

Important 3

❒Even when the optional Envelope Feeder Unit is not installed, you can select the sizes for the enve- lopes for Tray 2 using the control panel. However, you cannot load the envelopes until the optional Envelope Feeder Unit is installed.

❒To install the Envelope Feeder Unit, the optional Paper Feed Unit must be installed. See “Envelope Feeder Type 2600” in the Setup Guide.

Loading envelopes onto the Bypass Tray

Reference

With the Bypass Tray, you can load up to 10 envelopes at the same time. For more information about envelopes, see p.33 “Types of Pa- per and Other Media”.

Important

A Open the Bypass Tray.

❒ Do not slide the paper tray in with force. If you do, the front and side guides might move.

ZGDY190J

45