Installing Printer Utility for Mac | Ricoh AP2610N manual

2. Printer Utility for Mac

By using Printer Utility for Mac, you can download fonts, change the name of the printer and so on.

Limitation

❒If a Macintosh and printer are connected by USB, you cannot use Printer Util- ity for Mac.

Note

❒Printer Utility for Mac is included on the CD-ROM labeled “Drivers and Util- ities”.

❒Printer Utility for Mac requires Mac OS 8.1 or later. (Mac OS X Classic envi- ronment is supported.)

Installing Printer Utility for Mac

Follow these steps to install Printer Utility for Mac on the machine.

A Start the Macintosh.

B Insert the CD-ROM into the CD-ROM drive.

The CD-ROM icon appears.

C Double-click the icon of hard disk to open it.

D Double-click the CD-ROM icon.

The contents of the CD-ROM appear.

E Double-click the [PS Utility] folder on the CD-ROM, and then drag the [Print- er Utility for Mac] file, and then drop it into the Macintosh hard disk.

F Drag the CD-ROM icon and drop it into [Trash] to eject the CD-ROM.

Printer Utility for Mac is installed.

13

Image 435

Ricoh AP2610N setup guide Installing Printer Utility for Mac, Start the Macintosh Insert the CD-ROM into the CD-ROM drive

Contents

Setup Guide Means Power ON. b means Power OFF Setup Guide Page Trademarks Safety During Operation Safety Information Iii Positions of Labels and Hallmarks for Rwarning and RcautionPage Recycled Paper SpecificationsEnergy Saver mode Energy Star Program Manuals for This Printer Manuals for This Printer How to Read This Manual SymbolsVii Table of Contents Installing the Printer Driver Using Ieee Installing the Rpcs Printer DriverInstalling the PostScript Printer Driver Installing the Printer Driver Using USBPage Compact Body Features of This PrinterMajor Specifications Time Saving Printer Drivers for This Printer PCL printer driversRpcs printer driver Adobe PostScript Printer Drivers and PPD files SmartNetMonitor for Client SmartNetMonitor for AdminSoftware and Utilities Included on the CD Agfa Monotype Font Manager Viewing the Contents of the CD-ROM Guide to This Printer MainframeExterior Upper Cover Front Cover Release Button Power CordPower Switch Output Tray Standard Tray Interior Menu key Job Reset keyControl Panel Form Feed key Enter # key Escape key Option List Installing Options Available Options Paper Feed Unit Type 2600 Tray 2 or TrayEnvelope Feeder Type Basic model Printer Interior Network standard model Printer Interior Memory Unit TypeB 64MB Hard Disk Drive Type802.11b Interface Unit Type a Memory Unit TypeB 64MB Attach the interface cable to the printer Paper Feed Unit Type Reference Envelope Feeder Type Pull the handle and slide the con- troller board out Memory Unit TypeB 64MBUse a coin to remove the two screws Pull out the handle of the control- ler board If the Duplex Unit is not at- tached, go to step N Installing Options Network Interface Board Type Installing the Network Interface Board Fasten the Network Interface Board to the controller board If the Duplex Unit is not at- tached, go to step O Turn off the power switch Loop the network interface cable Connecting the Network Interface Cable to the Network Interface Unit Type Installing the 1394 Interface Unit Attach the 1394 Interface Unit to the controller board Fasten the 1394 Interface Unit to the controller board Bus Connecting the 1394 InterfacePower supply Required cable 802.11b Interface Unit Type a Attach the 802.11b Interface Unit Ing the Configuration HDD Error Initialize ? Hard Disk Drive TypeFasten the Hard Disk Drive Press On Line HDD Initialize Finish OKReady Press Enter # to format the Hard Disk Drive Remove the rear cover in the hor- izontal direction AD410 Duplex Unit After installing the last option that Remove the upper cover of the printer Bin Shift Sort Tray Type Slide the upper tray into the 1-bin Shift Sort Tray CS380 Mailbox CS380 Mailbox Installing Options Setting Name Value Ethernet Configuration Menu Host Interface Host Interface Network SetupNetwork Setup IP Address Network Setup Active Protocol IP Address 192.02k.033.044 Network Setup Network BootNetwork Boot *None Press U or T to display Network Boot LAN Type *Ethernet Network Setup Frame Type NWNetwork Setup LAN Type Frame Type NW *Auto Ieee 1394 Setup IP over Ieee 1394 ConfigurationHost Interface Ieee 1394 Setup Ieee 1394 Setup IP Address1394 Ieee 1394 Setup Scsi print IP Address1394 192.02k.033.044Scsi print *Active Ready Press U or T to display Ieee 802.11b Ieee 802.11b Wireless LAN ConfigurationIeee 802.11b Comm. Mode Host Interface Ieee 802.11b Gateway Address Ieee 802.11b ChannelAddress Subnet Mask Configuring the Printer for the Network Connection Installation Method Select Quick Install Quick Install Follow the instructions on the screen Click Install Installing the PCL 6/5e Printer Driver Installing the PCL 6/5e Printer DriverSelect PCL/RPCS Printer Drivers Setting Up Options Installing the Rpcs Printer Driver Installing the Rpcs Printer Driver Installing the Rpcs Printer Driver Click Next Check Local Printer and then click Next Installing the PostScript Printer DriverWindows 95/98/Me Installing the PostScript Printer Driver Installing the printer driver Select PostScript 3 Printer Driver Add Printer Wizard starts Setting up options Click the Device Settings tab Windows NT 4.0 Installing the PostScript Printer Driver Bidirectional transmission When connecting with a parallel cable When connecting with the network When connecting with IeeeWhen connecting with USB Setting up the PPD file Macintosh Installing the PostScript 3 Printer Driver Close the Chooser dialog box Click Configure Click Finish Installing the Printer Driver Using USBWindows 98/Me Installing the Printer Driver Using USB Check Specify a location, and then click Browse Enter the printer name, and then click Save Macintosh-Creating a Desktop Printer iconClick Change in USB Printer Selection Click Create Printing with Scsi Print Installing the Printer Driver Using Ieee Click Open Click OK Click Browse Windows XP Inactivating the Device Printing with IP over Found New Hardware Wizard dialog box, and then click Next Select SmartNetMonitor for Client/Admin Installing the SmartNetMonitor for Client/Admin Select Agfa Monotype Font Manager Installing the Agfa Monotype Font Manager Using Adobe PageMaker Version 6.0 or Index Rpcs UE USA G074 Means Power ON. b means Power OFF UE USA G074-8637 Printer Reference Page Trademarks Printer Reference this manual Setup Guide How to Read This Manual Table of Contents Locked Print Error & Status Messages on the Control PanelMaintenance Menu 114 Sample Print System Menu 124 Replacing Parts 143Specifications 157 Consumables 164 Information about Installed Software 165 Making printer settings from an application PCL 6/5e Accessing the Printer PropertiesWindows 95/98/Me Accessing the Printer Properties Changing the default printer settings Changing the default printer settings Printer Properties Windows 2000/Windows XP Accessing the Printer Properties Click Print to start printing Select the printer you want to use in the Select Printer box On the File menu, click Document Defaults Windows NT 4.0 Accessing the Printer Properties Click OK to start printing Rpcs Accessing the Printer Properties On the File menu, click Printing Preferences Select the printer you want to use in the Select Printer box Windows NT 4.0 Accessing the Printer Properties Making printer settings from an application Make any settings you require and click Apply Click OK PostScript Setting Up for Printing Printing Preferences Properties appears Select the printer you want to use in the Select Printer box Windows NT 4.0 Accessing the Printer Properties Making printer settings from an application On the File menu, click Page Setup Macintosh Setting Up for PrintingMaking paper settings from an application Setting up for printing from an application Press Job Reset on the control panel Canceling a Print JobSelect the name of the job you want to cancel On the Document menu, click Cancel Printing Double-click the printers icon on the desktop Macintosh Canceling a Print Job Uninstalling the PCL 6/5e Printer Driver Windows 95/98/Me Uninstalling the PCL 6/5e Printer DriverClick Yes to uninstall the printer driver Windows NT 4.0 Uninstalling the PCL 6/5e Printer Driver Windows 95/98/Me Uninstalling the Rpcs Printer Driver Uninstalling the Rpcs Printer Driver Close all applications that are currently running Windows NT 4.0 Uninstalling the Rpcs Printer Driver Windows 95/98/Me Uninstalling the PostScript Printer Driver Uninstalling the PostScript Printer Driver Macintosh Uninstalling the PostScript Printer Driver Windows NT 4.0 Uninstalling the PostScript Printer Driver Paper and Other Media Supported by This Printer Paper Types and SizesThis manual On the panel display Paper feed direction MmSize Input Paper Sizes Metric version Input Paper Sizes Inch version 10.12 ⋅ Supported paper weight Maximum number Sheets plain paper *1 Paper weight and number of sheets to be set Output Paper Sizes Metric version Output Paper Sizes Inch version 16K 68 ⋅ 101/2 101/2 ⋅ Types of Paper and Other Media Plain paper Paper RecommendationsLoading Paper Storing Paper Metric version Inch version OHP transparenciesAdhesive labels Envelopes Paper not supported by this printer Printable Area Loading Paper and Other Media Loading Paper in the Paper TrayLoad paper into the tray with the print side down Slide the catches inwards to unlock the tray Changing the paper size Return the catches to their orig- inal positions Slide the tray until it stops Adjust the side guides to the pa- per width Loading Paper in the Bypass TrayOpen the Bypass Tray Bypass Size 2 x Menu Paper InputPaper Input Bypass Size Bypass Size *11 x Menu Paper Input Ready Bypass Size Custom SizeCustom Size Horiz Custom Size Vert Bypass Tray Thick Paper Setting the Bypass Tray Paper TypePaper Input Paper Type Paper Type Bypass Tray Loading Paper in the Optional Paper Tray Loading Envelopes Loading envelopes onto the Bypass TrayLoad paper into the paper tray with the print side down Press U or T to display Paper Input menu Slide the side guides against the edge of the envelope stack Press U or T to select the envelope type you want to use Loading envelopes into the Envelope Feeder Unit Push the bottom plate down until it locks into place Press U or T to display Tray Paper Input Tray Paper SizeTray Paper Size Tray Press U or T to display Tray Paper Size Ready message appears on the control panel From an application, select the menu command to print Sample PrintPrinting a Sample Print File Qty Press # to Print Sample Print 0856 ABCD1234Select Action Print File Menu Sample Print Deleted Deleting a Sample Print FileProcessing ABCD1234 Press# to Delete Press T or U to display Error Files Checking the Error LogSample Print Error Files Error Files 0652 ABCD1234 Ready Printing a Locked Print File Password box, type a pass- word of four digitsClick OK After making all desired settings, click OK Locked Print Menu Locked Print PasswordPassword *2 Invalid Password Try Again Press T or U to display the Locked Print menu ABCD1234 Press # to Print Press T or U to display De- lete File Select Action Delete File Locked Print Error Files Messages/Second messages Description Solution Error & Status Messages on the Control Panel Troubleshooting See 1394 Interface Unit Type NV-RAM Error & Status Messages on the Control Panel Enter # Messages/Second messages Description Solution Messages/Second messages Description Solution Messages Description Comments Getting Printer Information over the NetworkPrinter current status Telnet Messages Description Comments Messages Description Comments Messages Description Comments Printer configuration Input Tray NameName Description Paper Size Description Input Tray Paper Size Status Description Input Tray StatusOutput Tray Name Output Tray Status Printer Does Not Print Possible Cause Solutions Network Connection Terface cable ERS\ UTILITY\1394\ Status Possible Causes, Descriptions, and Solutions Other Printing Problems On from the Maintenance menu Other Printing Problems Removing Misfed Paper When Remove Misfeed Paper Tray Appears When Remove Misfeed Internal Path/Open Front Cover Appears Close the front cover When Remove Misfeed Paper Exit Cover Appears Remove the rear cover in a hor Izontal direction Open the paper exit coverRemove the misfed paper Close the paper exit cover until it clicks Insert the fusing unit until it stops While holding the tab, remove the misfed paperClose the rear cover Close the rear cover of the Du- plex Unit When Remove Misfeed Duplex Unit Appears Misfed paper Close the cover of the Duplex UnitPull the Duplex Unit out Printer until it stops, and remove Close the upper tray cover Open the cover of the MailboxClose the cover of the Mailbox Open the upper tray cover Replacing the Toner Cartridge Be sure to put the toner cartridge on a stable, flat surface ZGDH130J Cleaning the Friction Pad Cleaning and Adjusting the Printer Move the printer to the edge of a stable table or desk Cleaning the Paper Feed Roller ZGDM120J Cleaning the Registration Roller Maintenance Image Density Adjusting the Image Density Press U or T to set the image density value Adjusting the Registration of the Trays Printing Adjustment Horiz. TrayRegistration Prt. Test Sheet Prt. Test Sheet Tray Press U or T to set the dig- it of the registration value mm 100 Menu Chart 101Category Function menu 102 103 104 Accessing the Main Menu 105 106 Paper Input MenuPaper Input Parameters Tray 107 Tray 1, Tray 2, Tray 108 Changing the Paper Input MenuPaper Input Tray Priority Tray Priority *Tray 109 110 Printing a ConfigurationList/Test Print Menu List/Test Print Parameters Press T or U to display the List/Test Print menu List/Test Print Config.Menu List/Test Print 111 Interpreting the Configuration System MaintenanceError Log Paper Input 114 Maintenance Menu 115 Maintenance Menu ParametersAdjustment Prt. Test Sheet 116 Protecting the menus Changing the Maintenance MenuMaintenance Menu Protect Menu Protect *Off 118 Canceling the protection Completed Restart Printer Menu MaintenanceMaintenance HDD Format HDD Format Press# to Start Press T or U to display WL.LAN Signal Maintenance WL.LAN SignalDisplaying the Signal Strength Press T or U to display the Maintenance menu WL.LAN Signal Good 100% Fair 50% Poor 30% Unavailable 18% 121Press Escape 122 Resetting the Ieee 802.11b Wireless LAN Settings Press T or U to display WL.LAN Defaults Maintenance WL.LAN DefaultsWL.LAN Defaults Reset-Defaults? Defaults reset 124 System Menu 125 126 127 Tiff System Energy Saver System MisfeedRecoveryChanging the System Menu Menu System Energy Saver *30 minutes Energy Saver Saver TimerPress U or T to display E. Saver Timer Energy Saver Saver On/Off Host Interface Menu Host Interface Parameters130 Menu Description Network Setup IP Address131 Ethernet Network BootFrame Type NW Active Protocol Scsi print IP Address1394Subnet Mask1394 IP over Trans. Speed WEP SettingsComm.Mode Channel 135 Host Interface TimeoutPress U or T to display I/O Timeout Changing the Host Interface Menu 136 Timeout *15 seconds PCL Menu PCL Parameters137 138 139 Changing the PCL MenuPCL Menu Orientation Orientation Portrait 140 141 Language MenuChanging the Language Menu Menu Language 142 Language English 143 Replacing Parts Checking the contents of the box Maintenance KIT Type 145 Check the contents of the box for the following itemsReplacing the Friction Pad Preparing to replace the parts Insert the new friction pad in the paper tray Replacing the Paper Feed Rollers 147 Replacing the Transfer Roller 148 Replacing the Fusing Unit 149Remove the rear cover in a hor- izontal direction Pull the fusing unit out Replace the new fusing unit into the printer150 151 Collate and Shift CollateCollate Shift Collate Spool Printing Confirm or delete the spooled job from a Web browser152 Setting of the Frame Priority Memory Capacity and Paper Size153 154 Setting of the Font Priority 155 Moving and Transporting the PrinterMoving the Printer Moving the printer in the short distance 156 Removing the Duplex Unit Specifications Dimensions *1 Paper WeightPower Source Power Consumption Memory Warm-up TimePaper Capacity Paper Output Capacity Options Paper Feed Unit Type Dimensions W⋅D⋅HEnvelope Feeder Type Dimensions W⋅D⋅H AD410 Duplex Unit Dimensions W⋅D⋅H Hard Disk Drive Type Storage Capacity Formatted Bin Shift Sort Tray Type Dimensions W ⋅ D ⋅ HCS380 Mailbox Dimensions W ⋅ D ⋅ H Stack Capacity Memory Type Number of PinsInterface Connector Memory Unit TypeB 64MB Module Type Data Transfer Speed Transmission Mode802.11b Interface Unit TypeA R-WL11 Transmission Spec Protocol 164 Maintenance KitConsumables Toner Cartridge Information about Installed Software Expat165 166 NetBSD 167 Authors Name List 168 169 170 Copyright UE USA G073-8617 Network Printing Guide Page Manuals for This Machine How to Read This Manual Features Interface supported protocols Windows 95/98/Me, Windows 2000/Windows XP, Windows NT Setting Up the Machine on a Network NetWare Configuring the machine as a print server Macintosh Configuring the machine as a remote printer Ad hoc mode Printing using the Ieee 802.11b Interface Infrastructure mode Printing using the Ieee 1394 Interface Setting Up a Client Computer Configuring Windows 95/98/MeConfiguring Protocols Using SmartNetMonitor for Client Configuring Macintosh Configuring Windows NTInstalling the NIB Setup Tool NetWare 4.x, 5/5.1 Advanced Settings Remote Maintenance by telnet Using SmartNetMonitor for AdminMonitoring and Configuring the Printer Using the Ieee 802.11b Wireless LAN Xiv Configuring Windows 95/98/Me Printing without a Print ServerPrinting with a Windows 2000 or Windows NT Print Server Command Prompt Configuring ProtocolsConfiguring TCP/IP and IPP for Printing Configuring the machine Configuring NetBEUI for Printing Configuring a Windows 95/98/Me computerConfiguration tab Configuring a Windows 95/98/Me computer SmartNetMonitor for Client features Using SmartNetMonitor for Client Click OK to close the printer properties Installing SmartNetMonitor for ClientUninstalling SmartNetMonitor for Client Deleting the port Setting Up the Printer Driver Select the printerClick the printer you want to use, and then click OK Click IPP Click NetBEUI Changing Port Settings Install the printer driver as a local printer Setting Up a Client Computer Printers connected to the network are displayed Windows 95/98/Me Configuration Printing with a Standard TCP/IP Port Configuring Windows Printing with a LPR Port Configuring a Windows 2000 computer Configuring the Protocols Configuring NetBEUI for Printing Using SmartNetMonitor for Client Click Close to close the Printer Properties When the confirmation message appears, click Yes Setting Up the Printer Driver Then type the IP address or host name Lowing Ports box, and then click Close Click Start, point to Settings, and then click Printers Configuring LPR Port Printing Click Next Click Network printer, and then click Next Click the printer you want to use, and then click Next Configure the protocol Configuring Windows XP Windows 2000, Windows XP or Windows NT print server Configuring the Protocols Configuring a Windows XP computer Internet ConnectionsWith the IP over 1394, click 1394 Connection Using SmartNetMonitor for Client Installing SmartNetMonitor for Client Setting Up the Printer Driver TCP/IP Changing Port Settings Configuring LPR Port Printing Click Next Click the printer you want to use, and then click Next Configuring Windows NT Windows NT 4.0 Configuration Configuring a Windows NT computer Configuring NetBEUI for Printing Type 0 as the Lana Number Using SmartNetMonitor for Client Click Apply From the Print to the following port box, select File Setting Up the Printer Driver IPP Changing Port Settings Configuring LPR Port Printing Click Network printer server and click Next Click the printer you want to use and click OK Printers listed by SmartNetMonitor for Admin Installing the NIB Setup Tool Running the NIB Setup Tool Installing SmartNetMonitor for Admin Quick Setup Using the NIB Setup Tool Wizard Click Wizard and click OKClick IPX protocol Dialog box for configuring the NetWare environment appears After checking the environment, click Next Basic Procedure NetWare 3.x Advanced Settings Setting Up as a Print Server Click Property Sheet and click OKSelect Bindery For type, select Remote Other/Unknown Create a print queue as follows Pconsole Setting Up as a Remote Printer Print Server Operation Mode group, click As Remote Printer Select the printer which is indicated as Not InstalledRemote Printer No. box, type the printer number Select Remote Parallel, LPT1 for type To exitTo start Type a new name, if you change the name of the printer To use NetWare 5/5.1 NetWare 4.x, 5/5.1 Advanced Settings Click Property Sheet and click OK Click IPX protocol Print Queue volume box, click the Browse button Click TCP/IP protocol Using Pure IP in the NetWare 5/5.1 environment NDS Context box, type the context of the print server Print Server Operation Mode group, click As Print Server Setting Up as a Remote Printer Remote Printer No. box, type the number of the printer Print Queue Volume box, click Browse button To exit Install the printer driver you want to use as Local printer Windows 95/98/MeClick Network and click Browse Click the PostScript tab Click the Printer Settings tabSelect to clear the Form feed and Enable banner check boxes Windows Windows NT Changing to EtherTalk Configuring Macintosh Configuring the Printer Changing the Printer NameChanging the Zone Protocol Stack Using SmartNetMonitor for Admin Changing the Network Interface Board Configuration Selecting WizardSelecting Property Sheet From the Tools menu, select User Management Tool Configuring the Energy Save ModeType the password, and then click OK Managing the User Information Configuring the Network Interface Board with a Web Browser Operating system browser requirementsBrowser Going to the Top Header Buttons Menu ButtonsStatus Configuring the Network Interface Board Settings Verifying the Network Interface Board Settings IPP AuthenticationPassword Ieee 802.11b Wireless LAN Linking the address URL to the Help button Monitoring and Configuring the Printer Changing Names and CommentsWeb Browser Type the computer name into the Computer Name box Exit SmartNetMonitor for AdminSelect Property Sheet, and then click OK Click the NetBEUI tab Change names and comments Type the user name and the password, and then click OK Exit the Web browser Displaying the Status of Printer Monitoring Printers Click Status and you can check the status of the printer Setting Ieee 802.11b Wireless LAN Using the Ieee 802.11b Wireless LAN LAN Type Ieee 802.11b Using in Ad hoc Mode Enter your user name and pass- word, and then click OK Changing to Infrastructure Mode Applying the Settings Setting SsidSetting the WEP Key Using WEP Make sure the LED of the Ieee 802.11b card is lit Confirming the Connection Using telnet Remote Maintenance by telnet Reference Commands ListInterface name Interface to be configured TCP/IP address Changing the Interface Msh ifconfig interface up Msh access range start-address end-address Access Control Command Information that is displayed Printer statusProtocol System log information Network Interface Board configuration settings information Access configuration Community name configurationAccess type configuration Protocol configuration Viewing setting IPP timeout configurationIPP user authorization configuration Bidirectional configuration for the direct printing port Configuring the IPP user authorizationView settings Setting timeout Commands Topics of setting Parameter Settings Setting Ieee 802.11b Ieee 802.11b settings are displayedParameter Value to be configured Key key value Job Spool Job Spool Setting Clearing Spool JobChanging the Host Name AutoNet Address configuration NTP Server Address Configuration Interval ConfigurationTime-zone Configuration Type the new password once again Changing the passwordType the current password Type the new password Supported MIBs Snmp Item name Meaning Understanding the Displayed InformationPrint Job Information Print Log Information Configuring the Network Interface Board 111 Ssid Message Description and Solutions Message ListSystem Log Information 114 115 IPXIP,NDSBINDERY 117 118 Configuring the printer with NetWare PrecautionsConnecting a Dial-Up Router to a Network Configuring the router Banner Printing after resetting the machinePostScript Printing from Windows NetWare Printing Form Feed Using AutoNet Using Dhcp Configuring a Wins Server Using a WWW browserClick Network Config Log out from telnet When Using the NIB Setup ToolWhen Using IPP with SmartNetMonitor for Client Using telnet Snmp Telnet 126 Copyright Network Printing Guide PostScript Page Using PostScript Page Setting up Options Job TypeNormal Select Sample Print in Job Type Click Details How to Use Sample Print Select Sample Print in Print Job After making all of the settings you want, click Print Select Locked Print in Job Type Click Details How to Use Locked Print Digits Select Locked Print in Print Job Open to Left CollateDuplex Printing Windows 95/98/Me Off Paper Selection Paper Size Media TypePaper source Resolution Destination TrayToner Saver Duplex Unit User Code Hard Disk MailboxUpper Tray Using PostScript Start the Macintosh Insert the CD-ROM into the CD-ROM drive Installing Printer Utility for Mac Double-click the icon of Printer Utility for Mac Starting Printer Utility for Mac Printer Utility for Mac Functions File menuUtility menu Click Cancel Downloading PS FontsClick Download Deleting Fonts Displaying Printers Fonts Setup Initializing the Printer DiskPrinting Font Catalog Select Rename Printer... on the File menu Printing Font SampleRenaming the Printer Select Print Fonts Sample... on the File menu Restarting the Printer Downloading PostScript FilesSelecting the Zone Select Display Printer Status... on the Utility menu Displaying the Printer StatusLaunching the Dialogue Console Close Chooser Printer Utility for Mac Printer Utility for Mac Page Unix Supplement Page Manuals for This Printer How to Read This Manual Printing Method Using the Installation Shell ScriptPage Assigning the IP Address Using the Installation Shell Script ALog on to the workstation as root Executing the Installation Shell ScriptConfirming the IP address AEnter the following Type the following to get the installation shell script CRun the installation shell scriptClose the ftp session FEnter the host name of the printer Configure the printer nameIMake a test print to confirm that the settings are correct EEnter the IP address of the printer Deleting the printer BSD Unix workstation, LinuxSolaris, HP-UX Mx#0 Adding an entry to the /etc/printcap file Making the log file Making the spool directory Registering the printer # lpadmin -p np -s nphost!option -T dump -I any Restart the scheduler Printing Method Printing with lpr, lpBSD Unix workstation To print all of the files in a directory Printing with rsh, rcp, ftpRsh Rcp To specify the file and print it Ftp To print one fileTo print several files System V UNIX, Soralis, HP-UX Printer StatusViewing the Printer Status with lpq and lpstat Viewing the Printer Status with rsh and ftp Parameter Information returned Reference Copying Information to a File Unix UE USA G056 Copyright Unix Supplement Quick Installation GUIDEG074-8627 Network connection Parallel connectionUSB connection