Ricoh AP2610N setup guide Enter #

Troubleshooting

	Messages/Second messages	Description	Solution
	Load Paper	The paper type and size set-	Load paper into the tray indi-
	/Paper Size:	tings for this tray do not	cated, then press {Enter #} to
		match the size and type of pa-	resume printing. Or press
	Paper Type:
		per actually loaded.	{Form Feed}and select the tray
			that holds a different type of
			paper. To cancel printing,
			press {Job Reset}. Then press
			{Enter #}.
	Load Paper Tray #	There is no paper left in this	Load paper into the tray indi-
	/Paper Size:	tray.	cated.
	Paper Type:
	Menu Protected	The menu is protected and the	Wait for two seconds until the
	Cannot Change	settings cannot be changed.	previous display appears.
	No Files Exist	There are no files available for	Wait for two seconds until the
		the sample print job or the	previous display appears.
		locked print job.
5
	Offline	The printer is offline.	If you want to bring the print-
			er online. Press {On Line}.
	Output Tray Changed	The output tray has been	Select the output tray correct-
		changed. The tray in the paper	ly.
		feed path is not set correctly
		when the printer receives the
		print job.
	Paper Invalid for Duplex:Tray	A paper setting for the select-	Change the paper setting with
	#	ed tray is not supported for	the control panel. Or press
	/Change Setting	duplex printing.	{Form Feed} several times un-
			til a tray with supported pa-
	or Form Feed	#: tray number
			per settings appears on the
			panel display.
			Or press {Job Reset} to cancel
			the print job.
	P= XX I= XXXXXXXX	A controller error. The SC	First, turn the power switch
	Power Off On	number indicates the prob-	off and then on. If the message
		lem.	appears again, call your sales
	/If Error Reoccur
			or service representative.
	Call Service
	Print Overrun	A Print overrun occurred on a	To print the image correctly,
		file being printed. Only a part	add memory to the printer or
		of the data on the page will be	reduce the resolution of the
		printed, and the print job is	image.
		suspended, or the current
		print job has been canceled.
	Printing...	———	Wait for a while.
	Processing...	The printer is processing in-	Wait for a while.
		ternally.

66