Ricoh AP2610N setup guide From the Print to the following port box, select File, Click Apply

4

Windows NT 4.0 Configuration

Installing SmartNetMonitor for Client

Install SmartNetMonitor for Client from the CD-ROM labeled “Printer Drivers and Utilities”. For more information about how to install, see the Setup Guide.

After the installation is complete, configure the printer port with SmartNetMon- itor for Client. See p.43 “Setting Up the Printer Driver”.

Deleting the port

The following procedure allows you to delete the printer port. If you want to de- lete the port which is currently used in Windows, switch the port to another such as “FILE”, then delete it. For more information about SmartNetMonitor for Cli- ent, see SmartNetMonitor for Client Help.

A From the [Printers] window, click the icon of the printer which uses Smart- NetMonitor for Client to print. On the [File] menu, click [Properties].

B Click the [Ports] tab, and then make sure that the SmartNetMonitor for Cli- ent port is shown in the [Print to the following port] box.

Remember the port name because this port should be deleted later.

C From the [Print to the following port] box, select [FILE].

D Click [Apply].

The port which is currently in use is changed.

E Click [Delete Port].

F After the confirmation message appears, click [Yes].

The port is deleted.

G Click [OK] to close the printer properties.

Uninstalling SmartNetMonitor for Client

Preparation

Before uninstalling SmartNetMonitor for Client, make sure that:

•The port settings dialog box is closed.

•No printer is using the SmartNetMonitor for Client port as a printer port.

•You have performed login with the same user authority as that used to in- stall SmartNetMonitor for Client.

A B

Open [Control Panel], and then double-click the [Add/Remove Programs] icon.

On the [Install/Uninstall] tab, click [SmartNetMonitor for Client] and click [Add/Re- move].

42