Ricoh AP2610N setup guide Changing the paper size, Slide the catches inwards to unlock the tray

Paper and Other Media

D Carefully slide the paper tray into the printer until it stops.

3

ZCEY150J

Important

❒Do not slide the paper tray in with force. If you do, the front and side guides might move.

Changing the paper size

Important

❒If you want to use the paper size and feed direction that are not

indicated on the paper size dial, set the dial to “p”. In this case, you should set the paper size using the control panel. See p.106 “Paper Input Menu”.

B While lifting the front side of the tray, pull it out of the printer.

ZCEY140J

Important

❒Confirm that the setting of the pa- per size dial matches the paper size and feed direction of the paper in the tray, otherwise the printer might be damaged, or printing problems might occur.

A Lift the paper tray slightly then pull it out until it stops. Adjust the paper size dial to match the size and feed direction of paper in the paper tray.

ZCEY110J

C If you load paper larger than A4

Kor 81/2 ⋅ 11 K, you should ex- tend the tray as follows:

Note

❒You cannot load paper smaller than A4 K or 81/2 ⋅ 11 K, if the tray is extended. In this case, re- turn the tray to its standard length.

A Slide the catches inwards to unlock the tray.

ZCEY160J

38