NetWare Configuration

F

G

Make sure that the MAC address and IPX address are correct, and then click [Finish].

Type the print server name into the [Device Name] box, and then click [Next >].

The default setting is “RDP_” followed by the 6 digit serial number. We rec- ommend that you change it to something that is easier to remember or some- thing based on the structure of the network.

H In a dialog box for selecting a network environment, click to select the [Net- Ware] check box and click to clear the [TCP/IP] check box.

I Click [Next >].

A dialog box for configuring the NetWare environment appears.

J Select [Bindery] when printing under Bindery mode, or select [NDS] when printing under NDS mode.

When you are using NetWare version 4.x, you should select [NDS].

5K If you selected [Bindery], type into the [File Server Name:] box the name of the file server in which a print server is to be created.

After clicking [Browse], you can select a file server among those listed in the [Browse] dialog box.

L If you selected [NDS], type into the [Tree:] box the name of the NDS tree in which the print server is created, and then type the context into the [Con- text:] box.

Clicking [Browse], you can select an NDS tree and an NDS context among those listed in the [Browse] dialog boxes.

As a context, object names are typed from a lower object and divided by a pe- riod. For example, if you want to create a print server into NET under DS, type “NET.DS”.

M Click [Next >].

N Type the name of the printer into the [Printer Name] box, and the name of the print queue into the [Print Queue Name] box.

The default setting for Printer Name is “Print Server Name” followed by “_1” and for Print Queue Name is “Print Server Name” followed by “_Q” (quota- tion marks are not included). You can change them if necessary.

52

Page 342
Image 342
Ricoh AP2610N setup guide Dialog box for configuring the NetWare environment appears