Storing and Calling up Blood Pressure Readings
Up to 90 readings each can be stored in the memory for two people.
Storing blood pressure readings
•All data is retained even when the batteries go flat or are changed.
•When measurements are taken and no date has been set, the date and
time will be displayed as “ 
” on the wireless display.
(After approx. 2 seconds.)
(After approx. 2 seconds.)
1. After measurement has been completed, the 
mark will be lit up.
Press the user selection button on the wireless display to select the desired user.
To select User … To Step 2.
To select User
… Press the user selection button.
2.Press the Memory/Recall button.
3.Memory storage is completed.
• A total for and of 90 readings can be stored in memory. Readings over the memory capacity will be recorded over the oldest measurement in memory.
•Readings cannot be saved when a measurement has been unsuccessful (display of the error mark
for blood pressure readings). Readings can be saved, however, when the
mark is displayed for the pulse rate.
•The memory number, measurement date, and time are alternately displayed in approximately 2 seconds.
(After approx. 2 seconds.)
