Preparations Prior to Taking Measurements | Panasonic EW3153

Preparations Prior to Taking Measurements

To use this product, the power supplies are required for both the main unit and the wireless display.

Main unit

Wireless display

Power supply

•Exclusive AC adapter (EW31555) (included) or

•4 AA-size Panasonic LR6 batteries Approximately 150 measurements can be taken.

Depending on the conditions, battery life may be dramatically shorter.

Use of the main unit with the dedicated AC adapter (EW31555) (included) is recommended.

Power supply

•2 AA-size LR6 batteries Approximately 2000 measurements can be taken.

Main unit and wireless display are not sold separately and cannot be purchased as replacement parts.

For Batteries

•Unit with batteries can be used up to 6 times a day when using Panasonic Alkaline batteries (AA-sized LR6 batteries) under the following conditions:

Room temperature: 73 °F (23 °C) Pressurized to 170 mmHg Circumference of the arm: 11-51/64(30 cm)

•If batteries other than alkaline batteries are used or batteries are used in a room colder than 73 °F (23 °C), and when measuring a person with thin arms or high blood pressure, battery life may be dramatically shortened.

*Use alkaline batteries. (Panasonic Oxyride batteries can also be used.)

English

Image 10

Panasonic EW3153W manual Preparations Prior to Taking Measurements

Contents

Instructions English Table of Contents Introduction Basics of Blood Pressure Important Instructions Before Use English Precautions to Ensure Safe, Reliable Operation English Blood Pressure Categories Systolic Blood Pressure SBP Preparations Prior to Taking Measurements Parts Identification Battery cover for main unitIR transmitter on both sides Connector Arm support Main unit View from Top Wireless display View from Bottom AM/PM comparison button When Using the Main Unit with Batteries Turn the main unit over Inserting the Batteries into the Wireless Display Adjust the date Setting the time and dateAdjust the month Adjust the hour Taking a Reading AdvicePut the main unit on a table in front of you Posture to obtain accurate measurements Sit quietly and relax while taking measurements Do not take measurements Positions of the main unit and the wireless display Arm is applied Press the On/Off and Start button on the main unit MeasurementRemove your arm from the main unit Movement detection function Irregular pulse function Alarm function signals high blood pressure When an Error Occurs During Measurement If the pressure cuff comes off Storing blood pressure readings Press the Memory/Recall button Memory storage is completed Calling up readings from memory Press the Memory/Recall button Deleting all data stored in memory Press the Adjust button 2 to switch off the unit Press the button After Use Specifications Mark does not light when an arm is moved Mark was displayed, I retried the measurement When should I measure my blood pressure?Is still higher than usual Care and Maintenance Display Status before error Cause and solution TroubleshootingSymptom Possible cause Press the ring portion on the outside One Panasonic Way 1H-1 Secaucus, NJ No.1 EN, SP