Panasonic EW3153W manual Troubleshooting, Display Status before error Cause and solution

Troubleshooting

Display		Status before error			Cause and solution
	The indication disappears in
	the middle of the operation.				Batteries are exhausted.
is displayed.	(the	or	mark is		(See pages 11–13.)
	displayed.)
	Pressurization to more than				Were measurements taken
	280 mmHg was performed.
					according to the proper
	The	mark flashes for			procedure and in the
	2 minutes or longer.				correct posture?
	Pressure decreased				(See pages 15–18.)
	suddenly.
is displayed.					Be sure your arm is
	The heart mark			blinked
					properly inserted into the
	only a few times or not at all.				main unit.
	Cuff does not inflate.				(See pages 15–18.)
					Has the unit detected
	Your arm or body moved.				movement?
					(See page 20.)
					Take it to the store where it
is displayed.	Failure of the main unit				was purchased for testing
					and repairs.

Symptom	Possible cause
	• The position of the main unit is higher or
Systolic or diastolic blood	lower than your heart when measuring.
	• Your arm was not inserted properly into the
pressure value is high or	main unit.
low.
	• You moved or talked during measurements.
	(See pages 15–18.)
Value is different from	• Blood pressure varies in response to minute
that measured by the
	changes in your mental state, such as your
doctor.
	reaction to a doctor’s presence.
Measurement values are	• Sit quietly for 4 to 5 minutes and then take
different with each	another measurement. (See pages 15–18,
	30–31.)
measurement.

33English