Setting the time and date
*Please be sure to set the date and time before taking the first measurement after purchasing the blood pressure monitor, or after replacing the batteries.
(If you attempt to take measurements without first setting the time and date then
1. Press the Set button “1” on the wireless display for at least 3 seconds.
2. Adjust the month.
Press the Adjust button “2” to adjust the number of the month.
3. Adjust the date.
(1) Press the Set button “1” and the number for the date will flash.
(2) Press the Adjust button “2” to adjust the number of the date.
4. Adjust the hour.
(1) Press the Set button “1” and the time will flash on and off.
(2) Press the Adjust button “2” to adjust the number of the hour.
5.Adjust the minutes.
(1)Press the Set button “1” and the number for minutes will flash.
(2)Press the Adjust button “2” to adjust the number of minutes.
6.Finally, synchronizing with a time signal, press the Set button “1” to complete the procedure.
• The date and time are alternately displayed in approximately 2 seconds.
7.Press the Adjust button “2” to turn off the unit.
During leap years, 3/1 will be displayed when it is February 29th. Please manually reset the date to 2/29.
