Movement detection function
If movement is detected while measurement is being taken and more
pressure is applied by the pressure cuff, the | mark will be displayed. | |
• Please redo blood pressure measurement again if the | mark flashes | |
or is lit. |
|
|
•If the arm to which the pressure cuff is attached is moved while measurement is being taken (e.g. the elbow is bent suddenly), in some cases correct measurements may not be obtained.
•When movement has been detected during measurement, the mark flashes when the blood pressure reading obtained during that measurement is displayed.
(If this reading is saved, the | mark will light whenever it is recalled.) | ||||
|
|
|
|
|
|
Movement Mark |
| Explanation |
| ||
|
|
| Movement has been detected. |
| |
|
|
| · The elbow has been bent suddenly. |
| |
|
|
| · The upper arm has been tensed. |
| |
|
|
| · The arm has been moved, etc. |
| |
|
|
| With correct posture, please take the measurement | ||
|
|
| |||
|
|
| again after measurement has been completed (see | ||
Flashing | page 16). |
|
| ||
|
|
| Movement has been detected that will significantly | ||
|
|
| affect the reading. |
| |
|
|
| · Significant movement has been detected. |
| |
|
|
| · Movement has been detected repeatedly. |
| |
|
|
| · Significant arm movement has been detected, etc. | ||
|
| Lit | Please take the measurement again (a | will | |
|
| appear on the display). |
| ||
*This function is designed to help you to take measurements accurately (see page 33). Even if the Movement mark is not displayed, we recommend that measurements be taken 2 times, with 5 minutes between readings, in order to obtain an accurate reading (see pages 15– 18 for correct position).
