Onkyo Mastering Double Bass Settings for Optimal Audio Performance

Advanced Setup—Continued

Double Bass		2
This setting is not set automatically by the Automatic
Speaker Setup function (see page 36).
With the Double Bass function, you can boost bass out-
put by feeding bass sounds from the front left, right, and
center to the subwoofer. This function can be set only if
the Subwoofer setting (step 3) is set to Yes, and the Front		3
setting (step 4) is set to Large in the Speaker Configura-
tion on page 67.
11	Use the Down [ ] button to

select “Double Bass (D.Bass),”
and then use the Left and Right
[ ]/[ ] buttons to select:
On: Double Bass function on.
Bass from the front left and
right channels is also fed to
the subwoofer (default).	4
Off: Double Bass function off.

12	Press the [SETUP] button.
	Setup closes.

Note: 5

• These settings cannot be changed while headphones are connected or the multichannel DVD input is being used.

Speaker Distance

These settings are set automatically by the Automatic

Press the [RECEIVER] REMOTE MODE button, followed by the [SETUP] button.

If you have a TX-SR506, proceed to step 4.

(TX-SR576 only)

Use the Up and Down []/[ ] buttons to select “2.Speaker Setup,” and then press the [ENTER] button.

Use the Up and Down []/[ ] buttons to select “Sp Distance,” and then press [ENTER].

While “Unit” is displayed, use the Left and Right []/[ ] buttons to select “feet” or “meters”.

feet: Distances can be set in feet. Range: 1 to 30 feet in 1-foot steps.

meters: Distances can be set in meters. Range: 0.3 to 9 meters in 0.3-meter steps.

Speaker Setup function (see page 36).

6

Use the Down [ ] button to

select “Front” (TX-SR506) or

With these settings, you can specify the distance from each speaker to the listening position.

1	Measure and make a note of the
	distance from each speaker to
	the listening position.

7

“Left” (TX-SR576), and use the

Left and Right [ ]/[ ] buttons to

specify the distance for the front speakers, then press the Down [ ] button to select the next speaker.

Repeat step 6 for all speakers.

Note:

Speakers that you set to No or None in the Speaker Configuration (page 67) cannot be selected.

69