First Time
3 | Use the Up and Down [ ]/[ ] |
| buttons to select |
and then press [ENTER].
4 Use the Up and Down []/[ ] buttons to select an input selec- tor, and then use the Left and Right []/[ ] buttons to select: COAX1: Select if the component is
Changing the Input Display
If you connect an
This setting can only be changed on the AV receiver.
|
|
| 1, 2 |
|
| 1, 2 |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| MASTER VOLUME |
STANDBY/ON |
|
|
|
|
|
|
|
|
|
| TUNING | PRESET |
|
|
STANDBY | ZONE 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
PURE AUDIO |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PURE AUDIO | MULTI CH |
| DVD | VCR/DVR | CBL/SAT | AUX |
| TAPE | TUNER | CD | SETUP | RETURN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| AUX INPUT |
PHONES |
|
|
|
|
|
|
|
|
|
|
| SETUP MIC | VIDEO | L AUDIO R |
| ZONE 2 | OFF | TONE |
| MOVIE/TV | MUSIC | GAME | DISPLAY | DIGITAL INPUT | RT/PTY/TP | MEMORY TUNING MODE |
|
|
|
connected to DIGITAL IN COAXIAL 1.
COAX2: Select if the component is connected to DIGITAL IN COAXIAL 2.
OPT1: Select if the component is connected to DIGITAL IN OPTICAL 1.
1
TAPE
or
CBL/SAT
Press the [TAPE] or [CBL/SAT] input selector button so that “TAPE” or “CBL/SAT” appears on the display.
OPT2: Select if the component is connected to DIGITAL IN OPTICAL 2.
- - - -
5 | Press the [SETUP] button. |
| |
| Setup closes. |
|
|
Notes:
• When an HDMI IN is assigned to an input selector in |
“HDMI Input Setup” on page 39, this input assign- |
ment is automatically set to the same HDMI IN. And |
in addition to the usual inputs (e.g., COAX1, COAX2, |
2
TAPE
or
CBL/SAT
Press and hold down the [TAPE] or [CBL/SAT] input selector but- ton (about 3 seconds) to change the setting.
Repeat this step to select MD, CDR, or DOCK.
For the TAPE input selector, the setting changes in this order:
TAPE → MD → CDR
→ |
| DOCK |
|
|
|
| |
|
| → |
For the CBL/SAT input selector, the setting changes in this order:
CBL/SAT ↔ DOCK
etc.), you can also select HDMI inputs. |
• This procedure can also be performed on the AV |
receiver by using its [SETUP], [ENTER], and arrow |
buttons. |
Note:
•DOCK can be selected for the TAPE input selector or CBL/SAT input selector, but not both at the same time.
43