Advanced Setup—Continued

Miscellaneous Setup (TX-SR576 only)

This section explains items on the Miscellaneous menu.

1

Press the [RECEIVER] REMOTE

 

 

MODE button, followed by the

 

[SETUP] button.

2

Use the Up and Down [ ]/[ ]

 

 

buttons to select

 

“6. Miscellaneous,” and then

 

press [ENTER].

3

Make sure that “6-1.Vol-

 

 

 

 

 

 

umeSetup” is shown on the dis-

 

play, and then press [ENTER].

4

Use the Up and Down [

]/[

]

 

 

buttons to select an item, and

 

use the Left and Right [

]/[

]

 

buttons to change it.

 

 

The items are explained below.

5

When you’ve finished, press the

 

 

[SETUP] button.

 

Setup closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.

Volume Setup

MaxVolume

With this setting, you can limit the maximum volume.

The Maximum Volume range is Off, 79 to 30.

PowOn Vol

This setting determines what the volume will be each time the AV receiver is turned on.

The range is Last, Min, 1 to 79, Max.

To use the same volume level as when the AV receiver was last turned off, select Last.

Note:

The Power On Volume setting cannot be set higher than the Maximum Volume setting.

HP Level

With this setting, you can offset the headphone volume relative to the main volume. This is useful if your head- phones are too loud or too quiet at the volume setting you usually use when listening through your speakers. The headphone level can be set from –12 dB to +12 dB.

73

Page 73
Image 73
Onkyo TX-SR506 instruction manual Miscellaneous Setup TX-SR576 only, Volume Setup