14 Appliance Setup
A. Remove the Packaging
Remove the shrink film, corrugated top cap, bottom cap and column protectors from the appliance. The appliance should look as shown in Figure 14.1.
Figure 14.1 Appliance Unwrapped
B. Open Front Screen Assembly
•Open the flap in the upper left hand corner of the screen protector (Figure 14.2)
•Pick up on the screen to release the screen from the shoulder screws in the fireplace columns. See Figure 14.3.
•Rotate the screen open as shown in Figure 14.4.
C.Remove the Shipping Materials
Remove the shipping materials from inside or underneath the firebox.
Figure 14.2 Open Access Flap
Figure 14.3 Lift up on Screen
D. Remove Fixed Glass Assembly
See Section 14.K.
E. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated inside the firebox or underneath in the control cavity.
F. Accessories
Install approved accessories per instructions included with the accessories. Refer to Section 16.
WARNING! Rick of Fire and Electric Shock! Use ONLY Hearth & Home
Figure 14.4 Rotate Screen Open
Heatilator • Novus NDV Series • | 55 |