M. Install Floor Cover
Install the floor cover as shown in Figure 14.10.
Figure 14.10 Installing Floor Cover
Note: The floor cover in the bottom front of the fireplace may be covering the UL labels. It is loose and can be removed/
replaced.
N. Fixed Glass Assembly
Removing Fixed Glass Assembly
WARNING! Risk of Asphyxiation! Handle fixed glass assembly with care. Inspect the gasket to ensure it is undamaged and inspect the glass for cracks, chips or scratches.
DO NOT:
•Strike, slam or scratch glass
•Operate fireplace with glass removed, cracked, broken or scratched.
Replace fixed glass assembly as a complete assembly.
•Remove screen.
•Pull the four (30/33/36 in. appliances) or seven (42 in. appliance) glass assembly latches out of the groove on the glass frame. Refer to Figure 14.11.
•Remove the glass assembly from the appliance.
Latches
(both bottom
and top)
Glass
Assembly
Figure 14.11 Glass Assembly
Replacing Fixed Glass Assembly
•Set the glass panel on the lower two or four glass assembly latches, ensuring the glass panel is centered in the opening.
•Replace screen.
O. Close the Screen Assembly
Rotate the screen closed. See Figures 14.12 and 14.13.
Figure 14.12 Closing Screen
Figure 14.13 Closing Screen
58 | Heatilator • Novus NDV Series • |
