2. QUICK SETUP
This setup should take approximately ten to fifteen minutes to completeif you use the default settings. For this setup, take the clock to a comfortable position that has access to power.
Installing Ribbon Cassette
MAKE SURE THE POWER IS ON BEFORE INSTALLING.
1 Hold the left and right sides of the cover and lift up. Then, lift up the antenna case.
2 Turn the knob of the new ribbon cassette in the same direction as the arrow to tighten the ribbon.
3 Place the ribbon cassette inside the time recorder as shown in the figure. Push the ribbon cassette until it snaps into the clasps on both sides. If it is difficult to insert the ribbon cassette, try it while turning the knob.
3
Antenna Case
Knob
Clasp
Knob
Clasp
(located on both sides)
