Setting the Time Zone for Atomic Clock Function
The Model 7500E can be set to one of the four United States time zones. Additionally, two more options including no reception of WWVB signal are available with this model. By default, the unit is shipped preset to Eastern Time.
| Order Option | Notes |
|
|
|
|
|
1 | Eastern | Default |
|
|
|
|
|
2 | Central |
|
|
|
|
|
|
3 | Mountain |
|
|
|
|
|
|
4 | Pacific |
|
|
|
|
|
|
5 | Other | Adjusts just "minute" and "second" by the WWVB radio signal. |
|
|
| You must set "date" and "time" to your local time first before |
|
|
| starting reception of the WWVB signal. |
|
|
|
|
|
6 | No Reception | Disables atomic clock function and does not adjust time by the |
|
|
| WWVB radio signal. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Important Note: To set the Time Zone for Atomic Clock Function, you must start at Step 1 of "Setting the Display Hours". Continue from Step 3 of "Setting the Display Hours" to Step 4 of "Setting the Time Zone".
Example: Change the time zone to "Central".
CLOCK
OPTION
SELECT
Time
Zone
CHANGE
SET
4 In case of the example, push the CHANGE button to set at "2", and then push the SET button to finish the setting. At that moment, the display will change from flashing to steady and the setting is now completed.
5 Push the SET button once again. Then the unit starts reception of the
Reception
Indication
Signal Condition Indication ON 
Good
FLASHING or OFF 
Not good enough
WWVB radio signal.
Please see "Radio Signal Reception" on page 34 for more information on the WWVB signal.
5 | 6 |
