4 Install the ribbon cassette so that the ribbon is between the print head and the ribbon mask (see the figure on the left). Printing will not come out properly if the ribbon is placed behind the ribbon mask (see the figure on the right).
Print head | Print head |
Ribbon mask | Ribbon mask |
Ribbon | Ribbon |
CORRECT | WRONG | |
5 Turn the knob of the ribbon cassette in | 6 Set the antenna case down. Leave the | |
the direction of the arrow to tighten | cover off while changing any settings in | |
the ribbon. | the next step. When the settings are | |
complete, replace the cover. | ||
|
Knob 
4
