Card reassign
When the card that you are using becomes full (Max 64 punches), it will show "End" on the display and the buzzer will sound. When the "End" appears, you can use the "Card reassign" mode to transfer the card and have a new card take over from the old one.
In this function, it will be useful:
•when the card has become full before reaching the "Pay Period". [In Payroll Mode]
•when the card that is lost or damaged.
You can transfer the old card to a new one with the same number or the one which is not used in the current pay period. If you are already using all time cards from No. 1 to 100, you can transfer the card only to the new one with the same card number. If you prefer to use another time card with a different number, you must reset the corresponding card first.
Example
Card of No.3 | Card of No.17 |
003
017
transfer
Cover
The number of cards
CHANGE
1
2
Remove the cover.
Push the CHANGE button for 5 seconds.
When you have a card that you are using, the number of cards that you are using will be shown on the display. If there are no cards used at the present state, it will show "n000" and will end the mode.
37 | 36 |
