Setting the Mode
This time recorder can operate in one of two modes; Payroll Mode or Job Cost Mode.
In Payroll Mode and Job Cost Mode, the recorder prints total elapsed time between IN(Start) and OUT(Stop), and also prints a running total of accumulated time per time card on each line. The clock matches pairs of punches and calculates the elapsed time between that pair using predefined rounding rules. The recorder always prints the actual time on the time card, regardless of rounding rules. In Payroll Mode the hours accumulate and reset based on "pay period settings" that are configured during setup. In Job Cost Mode the hours for each unique card can accumulate and reset based on "manual card reset" ("cleared") by performing a manual operation on the time recorder.
Order Option
1Monthly
2Weekly
3
4
5JOB COST
Payroll Mode
Job Cost Mode
Payroll Mode
To set to "Weekly" period, go to page 14.
To set to "Monthly" period, go to page 15.
To set to 
To set to
13
