Setting Monthly Period in Payroll Mode
the starting date is the 21st. | |
|
|
MODE
FUNCTION CHANGE
1 Push the FUNCTION button for 5 seconds and make sure the " 
" is positioned under the “MODE” mark.
SET
Monthly period
MODE
FUNCTION 
CHANGE SET
Starting date
MODE
FUNCTION 
CHANGE SET
Set the "Mode".
2 In the case of monthly period, push the CHANGE button to set the left- side number at "1" and then push the SET button. At that moment, the flashing of the display will change to the
Set the "Starting date".
3 To set pay period, you have to input a starting date. In this case, you have to set 21st. Push the CHANGE button to set at "21" and then push the SET button.
4 Push the SET button once again.
You have completed this setting. Go to the next setting listing in
"Default Settings" on page 7 to continue with the setup.
15 | 14 |
