Job Cost Mode
This mode is basically the same as Payroll Mode, but has no pay period. After punching 64 times, the end sign appears.
If you want to be able to reset the card manually without removing the cover, you must select "Reset is YES". See page 36 on "Resetting Cards In Job Cost Mode".
Example: Change to Job Cost Mode and Card "Reset" is YES.
MODE
1 Push the FUNCTION button for 5 seconds and make sure the " 
" is positioned under the "MODE" mark.
FUNCTION CHANGE
SET
Job cost
mode
MODE
FUNCTION CHANGE SET
Set the "Mode".
2 Push the CHANGE button to set the
Card "Reset"
Set the card "Reset".
Card "Reset"
1 No |
MODE
is YES
2 | Yes |
Default set to 'No'.
FUNCTION CHANGE
SET
3 In this case, push the CHANGE button to set at "2" and then push the SET button.
4 Push the SET button once again.
You have completed this setting. Go to the next setting listing in
"Default Settings" on page 5 to continue with the setup.
17 | 18 |
