Xerox C20 Memory SIMM, Installing a Flash, in “Accessing the System Board from the Rear” in the

	Flash Memory
Installing a Flash	Before you install a flash memory option, follow the steps
Memory SIMM	in “Accessing the System Board from the Rear” in the
	previous section.
	A memory SIMM is easily damaged by static electricity.
	Touch something metal to discharge any static
	electricity before you touch it.
	To install a flash memory option:

1

2

3

Locate and remove the code SIMM card from the printer system board.

You reinstall the code SIMM card after the flash memory option is installed.

Locate the flash memory connector on the printer system board. It is the connector behind the code SIMM connector.

Unpack the new flash memory SIMM. Avoid touching the connection points along the edge. (Save the packaging.)

Appendix C: Printer Options ❖ C-11