Xerox 1 Printer operation problems continued, Problem, Action, DocuPrint C20/NC20 User Guide

Table 5.1 Printer operation problems (continued)

Problem	Action
Print material misfeeds	• Make sure the paper you are using meets the specifications for your printer.
or multiple feeds occur.	See the separate Supplies/Options Guide for more information.
	• Flex paper or other print material before loading it in the input tray or the
	optional Tray 2.
	• Make sure the print material is loaded correctly.
	• Make sure the paper width and length guides on the input tray are adjusted
	correctly.
	• Do not overfill the paper sources.
	• Do not force paper down into the manual feed slot when you load it;
	otherwise, the paper may skew or buckle.
	• Remove any curled paper from the input tray or optional Tray 2.
	• If there is a recommended print side for the paper, load the paper as
	described in Chapter 2: Loading Print Media.
	• Load less paper in the paper sources.
	• Turn the paper over or around and try printing again to see if feeding
	improves.
	• Do not mix paper types.
	• Do not mix reams of paper.
	• Remove the top and bottom sheets of a ream before loading the print
	material.
	• Load a paper source only when it is empty.
	Table 5-1 Page 2 of 4

5-4 ❖ DocuPrint C20/NC20 User Guide