Xerox NC20 manual Option Card Installation, Push the card straight into the printer

Option Card Installation

6 Align the left side of the option card with the track inside the card guide.

Make sure the connectors on the right side of the option card clear the cable connector opening.

7 Push the card straight into the printer.

The option card automatically shifts toward the right as you push it in, aligning the right side of the option card with the cable connector opening.

The connector on the option card fits firmly into the option card connector.

The cable connectors on the side of the Tri-Port interface option card must fit through the cable connector opening on the back of the printer.

8 Insert the two screws saved when you removed the metal plate (or the extra screws shipped with the card) into the holes on either side of the cable connector opening on the back of the printer.

9

10

Gently tighten the screws to secure the card to the system board.

Continue with “Closing the System Board from the Right” on the next page.

Appendix C: Printer Options ❖ C-23