Xerox NC20 manual Installing Printer Options, Table C.1 Installing Options, Go to

Installing Printer Options

Installing Printer Options

You can customize your printer by changing memory capacity and installing different connectivity options. This chapter provides instructions for installing each option. To install each option, you must first access the printer system board. Access is from three locations depending upon the option you are installing:

•Under the input tray and output bin unit on the front of the printer

•The back of the printer, and

•The right side of the printer (when facing the front of the printer).

Table C.1 lists printer options, where to access them, and where to find installation instructions.

Table C.1 Installing Options

Option	Location of System Board Access	Go to...
Printer memory	Under the input tray	page C-4
Flash memory	On the back of the printer	page C-9
Tri-Port interface card	On the right side of the printer	page C-17
Hard Disk	On the right side of the printer	page C-20

You need a small Phillips screwdriver to complete the installation of some options.

Appendix C: Printer Options ❖ C-3