Xerox NC20 manual Attaching the Paper Support, Input Tray, Appendix C Printer Options C-27

Input Tray 2

Attaching the

Paper Support

1

2

Locate the slot on the back of the paper tray.

Align the tab on the back of the paper support with the slot on the paper tray.

3	Push straight down on the paper support until it stops.
4	Reconnect all cables to the back of the printer.
5	Reconnect the power cord to the printer and a properly
	grounded electrical outlet.
6	Make sure the Ready status message appears on the
	Control Panel display.

If an error message appears, see Chapter 5 in the System Administrator Guide.

To verify that Tray 2 is installed properly, see Chapter 3, Printing Menu Settings.

Appendix C: Printer Options ❖ C-27