Xerox NC20 manual Input Tray, Installing the Paper Tray, Appendix C Printer Options C-25

Input Tray 2

Input Tray 2

Tray 2 is shipped in two pieces, the paper tray and the paper support. The following sections give complete instructions for attaching the paper tray and the paper support.

Installing the

Paper Tray

1 Make sure you have all the items shown. If any items are missing or damaged, contact your Xerox representative or authorized Xerox dealer. Slide the system board access cover to the left until it snaps into place.

2 Unplug the printer power cord.

3 Remove the rear cover.

APress down on the two tabs located at the top of the rear cover and pull the cover away from the printer.

B Store the rear cover for future use.

4 Locate the slots on both sides on the back of the printer.

Appendix C: Printer Options ❖ C-25