Xerox manual To Load the Manual Feed Slot, Loading Paper, DocuPrint C20/NC20 User Guide

Loading Paper

To Load the Manual Feed Slot

1

2

If you are loading envelopes, go to Step 2. Place a single sheet of print material face up with the side of the print material aligned against the right side of the manual feed. If using preprinted letterhead, see the section “Using Letterhead” (page 2-19)for proper page orientation. Go to Step 3.

Place a single envelope face up with the long side aligned against the right side of the manual feed. Put the envelope stamp side up with the stamp corner facing down.

3 Slide the print material as far as it will go into the manual feed slot. If you do not insert the print material far enough into the manual feed slot, it may skew or not feed at all.

Feed print material one at a time. If you try to load more than one piece of print material, the printer may attempt to feed all of the print material through the paper path, causing a paper jam or damaging the printer.

If you are not using large-size paper, go to Step 5 on page 2-11.

2-10 ❖ DocuPrint C20/NC20 User Guide