Xerox NC20 Load Manual, Custom Type Name, size, 3 Common error messages continued, Message

		Common Error Messages
Table 5.3 Common error messages (continued)
Message		Cause/Action
Load Manual	The printer requests print material to be manually fed from the manual feed
Custom Type Name	slot.
size	Line 2 displays one of the following items:
type size
	Custom Type Name: A user-defined name, for custom type 1 through 3. The
	name is truncated to 16 characters.
	size: If the requested type matches the type currently in the tray and the
	custom type name has not been defined by you, only the paper or envelope
	size displays. The name is truncated to 16 characters.
	type size: The requested type is a type other than a custom type. The type
	name is truncated to 16 characters. The requested size of paper or envelope
	displays. The size name is truncated to 16 characters.
	When this message displays you can:
	• Load the requested size or type of print material in the manual feed slot. The
	printer automatically clears the message and continues printing the job.
	• Press	if the correct size and type print material is loaded in the manual
	feed slot.
	• Press OK to clear the message and print on the print material installed in the
	standard input tray or the optional Tray 2.
	• See “To Cancel the Current Print Job” (page 5-24).
	• See “To Reset the Printer and Cancel the Print Job” (page 5-25).
		Table 5-3 Page 6 of 6

Chapter 5: Troubleshooting ❖ 5-23