Xerox C20 Loading Paper, Use the paper length indicators printed on the top, Loading Print Media

Loading Paper

4 Place the envelopes with the print side facing you and the long side aligned against the right side of Tray 2. The stamp side faces up with the stamp corner facing down.

Do not overfill Tray 2 because the print material may not feed correctly through the printer or you may get a paper jam. Do not feed a stamped envelope into the printer. The stamp is shown for orientation purposes only.

5	Slide the print material as far as it will go into Tray 2. If
	you do not insert the print material far enough into
	Tray 2, it may skew or not feed at all.
	Use the paper length indicators printed on the top
	right-hand side of the tray to determine that the
	print material is fully inserted into Tray 2.
6	Squeeze the tab on the width guide lever and slide the
	width guide lever to the right until it touches the edge of

the print material.

If you are not using large-size paper, go to Step 8 on page 2-14.

Chapter 2: Loading Print Media ❖ 2-13