Problem solving guide
The “Pre-wash” indicator lamp flashes.
Start the programme again.
If the indicator still flashes, call the Miele Service Department.
The “Main wash” indicator lamp flashes during, or after the end of a programme.
If this occurs again during the next pro- gramme, call the Miele Service Depart- ment.
Despite adequate water sup- ply pressure, the machine takes a long time to fill.
Clean the filters in the water inlet sys- tem as described on page 28.
Large amounts of unused detergent remain in the dispen- ser drawer.
Water supply pressure is too low.
Clean the filters as described on page 28.
Select the “Water plus” option if necessary.
If using a water softener, pour the detergent into the dispenser before adding the water softener.
Fabric softener is not com- pletely dispensed or water re- mains in the p compartment .
The dispenser drawer was opened while the fabric softener was being flushed in,
or
The siphon tube is incorrectly posi- tioned or clogged. Clean as described on page 25.
30
