Runco VX-55D, VX-44D Ir Output Indicator, On / Off, Enter, Cursor Buttons, Light, Menu, Video

Controls and Functions

1.IR OUTPUT INDICATOR

Lights when a button is pressed to indicate that an IR signal is being transmitted.

2.ON / OFF

Press to turn the projector on or off.

3.ENTER

Press to select a highlighted menu item or confirm a changed setting.

4.Cursor Buttons (, , , )

Use these buttons to select items or settings, adjust settings or switch display patterns.

When no menu is present on-screen, the UP and DOWN buttons toggle through the available aspect ratios, in this order:

UP Button = 16:9 - 4:3 - Letterbox - VirtualWide - Cinema - Virtual Cinema DOWN Button = Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9

Note	Virtual Cinema is available only on the VX-44d/-55d/CineWide. For
	more information about aspect ratios, refer to Table 4-1.

Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this order:

LEFT Button = HDMI 2 - HDMI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 - S-Video 1 - Composite

RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB 2 - HDMI 1 - HDMI 2

5.LIGHT

Press to illuminate the buttons.

6.MENU

Press this button to access the OSD controls, or to exit the current menu and return to the previous one.

The UP, DOWN, LEFT, RIGHT, ENTER and MENU buttons are

Note functional only when an analog source (HD/RGB, SD Component,

Composite or S-Video) is selected.

7.VIDEO (1)

Press to select Composite video input as the source or to enter the numeric character “1.”

8.COMP (Component) (2)

Press to select Component SD (480i/576i) video input as the source or to enter the numeric character “2.”

Runco VX-44d/-55d Owner’s Operating Manual 15