Runco VX-55D, VX-44D manual Connections to the VX-44d/-55d and DHD Controller

Installation

Proceed as follows to connect the DHD Controller to the VX-44d/-55d, your video sources, external controller(s) – if present – and AC power.

When connecting your equipment:

•Turn off all equipment before making any connections.

•Use the correct signal cables for each source.

•Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have them.

To access the connector panel, pull firmly on the cable access cover to open it.

Connect the HDMI and RS-232 outputs from the DHD Controller to the corresponding inputs on the VX-44d/-55d; see Figure 3-8.

3.7

Connections to the

VX-44d/-55d and DHD Controller

Connector Panel Access

Connecting the DHD

Controller to the

VX-44d/-55d

Serial No

Model

Video Processor / Controller

HDMI Out

				SYSTEM CONTROL INTERFACE	CAUTION	!
		INPUTS			RISK OF ELECTRIC SHOCK
					DO NOT OPEN
R/Pr	G/Y	B/Pb	H	V	AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

TRIGGERS

									CAUTION: TO REDUCE THE RISK OF ELECTRIC
					HD1				SHOCK, DO NOT REMOVE COVER. NO USER-
									SERVICEABLE PARTS INSIDE. REFER SERVICING
						1	2	3	TO QUALIFIED SERVICE CENTER.
									IR
					HD2
R/Pr	G/Y	B/Pb	H	V					WARNING: TO REDUCE THE RISK OF FIRE
									OR ELECTRIC SHOCK, DO NOT EXPOSE
									THIS APPLIANCE TO RAIN OR MOISTURE.
				SDI	Pr	Y	S-Video 1
				Pb

100-230VAC 50-60 Hz, 165 Watts Max

HDMI 1 HDMI 2 Option Component Video Video S-Video 2 RS-232 Out RS-232 Control Made In USA

HDMI OUT

RS-232

OUT

Figure 3-8. Connecting the VX-44d/-55d to the DHD Controller

Runco VX-44d/-55d Owner’s Operating Manual 29